Quick Change Over of Die Jaws

Quick Change Over of Die Jaws

Tim Piepenbrink Tim Piepenbrink

Tim Piepenbrink

Component Tool & Mfg Co - contact us at 708-672-5505 Sponsor of Makers Machining - a YouTube Channel

发布日期: 2017年1月10日
+ 关注

JAW SETTING FIXTURE ACCURATELY LINES UP TOOLING OFFLINE

Be ready to drop your next set of jaws right into the cut-off die.

Your jaws and spacers get screwed together right on this precision fixture so you can visually check to make sure everything is aligned properly, and that both blades have the correct clearance.

Place the jaw Spacers into the key slots and then set the Jaws on the T-Keys. Align the screw holes and hand tighten everything together.

Snug the jaws down onto the fixture a little tighter and then finish tightening the cross screw(s) to sandwich the jaws around the spacer, which really holds everything together. Now you can inspect the set-up while your jaws are on the fixture.

Are all four jaws sitting perfectly flat on the fixture surfaces? If not, maybe the bottom of the jaws are not square with the cutting face/jaw spacer step. You will also see if the wide portion of the jaw spacer is sticking out from under the bottom of the jaw.

Once you have verified that all the tooling is in the correct position, you are ready to make your jaw change. Your operators won't have to fight the tight quarters in the die to check that everything lines up.

Contact us with any questions, or for quote on a Jaw Setting Fixture.

Component Tool & Mfg. 708-672-5505 email - - ctm@ix,netcom.com

www.componenttool.com

要查看或添加评论，请登录

Tim Piepenbrink的更多文章

  • One of a kind " Foot-Nut"
    2020年6月1日

    One of a kind " Foot-Nut"

    Here is a custom Foot-Nut we made a couple years ago. We started with a 13-3/4" diameter bronze tube X 14" long, and…

    1 条评论
  • Jaw Holder Posts for a Single Cut Die
    2019年9月27日

    Jaw Holder Posts for a Single Cut Die

    New Jaw Posts ready to ship. Ground for accuracy after being heat treated.

  • Someone found a stack of $20's
    2019年9月11日

    Someone found a stack of $20's

    Send us your dull cut-off blades and you'll find the same thing! They can be sharpened several times if you don't wear…

  • Passline Performance Booth D-47229
    2019年9月9日

    Passline Performance Booth D-47229

    FABTECH 2019 is just two months away. Bring your Cutoff questions to discuss.

  • See us at FABTECH Atlanta November 6th-8th Booth # C10519
    2018年10月31日

    See us at FABTECH Atlanta November 6th-8th Booth # C10519

    We're excited to be back again this year at FABTECH Atlanta. This is our 10th consecutive year of exhibiting at this…

  • Welcoming Tom O'Brien to our Team!
    2018年5月10日

    Welcoming Tom O'Brien to our Team!

    Looking forward to having you meet our customers, It is a pleasure to work with each and every one of them, as you will…

  • Tooling for Tube and Pipe Cut-Off
    2017年10月16日

    Tooling for Tube and Pipe Cut-Off

    FABTECH 2017 is only 3 short weeks away! ! ! * * * * * Bring any questions and ideas regarding your Cut-Off Process in…

  • Jaw Post Puller
    2017年10月3日

    Jaw Post Puller

    Remove or Install your Jaw Posts easier and safer! How many times do you fight spring pressure when taking out your Jaw…

  • Product Guide for your Cut-Off Operation
    2017年7月19日

    Product Guide for your Cut-Off Operation

    From your last stand, to the Cut-Off die, you can maintain better alignment with adjustable rollers - contacting all…

    1 条评论
  • CUTOFF TOOLING FOR TUBE & SHAPES
    2017年2月27日

    CUTOFF TOOLING FOR TUBE & SHAPES

    JAWS, CLAMPS, CROPPING DIES, NEW AND REBUILDING SINGLE AND DOUBLE CUT DIES, STOCK ROOM ITEMS FOR SPARE PARTS..

社区洞察

其他会员也浏览了