QS-B220 USERS! CAN THE CANISTERS!

Those pesky canisters.?When it comes time to verify, how many of these annoyances have you encountered?

• Touching the canisters at least three times daily, which causes the potential spread of contamination across checkpoints (even with changing gloves)
• Canisters are dropped, making them instantly unusable
• Sometimes broken canisters ARE used, causing over-contamination inside the detector
• The amount of wasted traps and gloves on successful and failed verifications (2200 sample traps and 2200 gloves per detector annually!)
• Leaving canister lids open, causing contamination with anything they touch
• Mixing up A and B during the verification procedure
• Problems with storage of A and B canisters
• Leaving a sample trap in a canister in order to get a good verification (I taught you all better than that!)

I’m sure you can add to the list.?Wouldn’t it be nice to eliminate some, no, ALL of those canister problems??If only there was a way to perform verification cleanly, efficiently, and affordably…

Well, there is!?Leave it to DSA Detection.?We solved the messy verification canister problem with a single, easy-to-use verification trap.

It’s called the Dual Mode Verification Trap (DMVT).?This amazing trap performs the function of BOTH Positive and Negative canisters in a fraction of the time.?Simply insert the trap, don't blink, and a few seconds later both the positive and negative modes on your B220 are verified.?And best of all, DMVT has been FULLY APPROVED by TSA and the Test Lab (TSL).?The TSL has provided approval documentation to buying agents at every airport.

DMVT verification has significant advantages.?To put it simply, the DMVT routine requires NO RETRAINING.?The verification prompts are the same! Just change your detector over to "TRAP" verification in the Settings menu (it only takes a second, but a Service Level password is required and I can help).?Twenty-seven seconds later you are finished (vs. approximately 104 seconds for canister IF verification is successful).?Just one trap.?One set of gloves.?No contamination.?No wasted sample traps or gloves.?Think of the significant advantage$$$ you’ll experience with DMVT verification. Join over 80+ airports and counting, many of them experiencing savings of $20-30 thousand dollars annually! We can do a customized report for you.

See for yourself the advantages and cost savings here.?Dual Mode Verification Trap Information

You’ll find an Oscar-worthy instructional video as well as a cost calculator that will show you your savings by switching to DMVT.?Just input your data and press CALCULATE.?Your annual savings will appear.?And don’t forget to calculate all the headaches that will go away!?If you are stuck, send me an email at [email protected] and I’ll input your data for you.

So next time I ask about that nasty checklist, hopefully you’ll say none of those items are issues any longer.?"We use DMVTs from DSA Detection!"