QEEHUA PUMP: The working principle and advantages of magnetic pumps

Magnetic Drive Pumps

Magnetic drive pumps, also known as magnetically coupled pumps, transfer power through a magnetic field to achieve contactless synchronous transmission of the shaft power. The main components include an outer magnetic rotor, inner magnetic rotor, synchronous or asynchronous design, and a fully sealed isolation sleeve. The main advantages are:

• Zero Leakage Design: Power is transmitted through the magnetic field and thin-walled isolation sleeve, fundamentally eliminating leakage pathways through the shaft seal, achieving complete sealing.
• Overload protection: QEEHUA PUMP’s proprietary “triple protection device” effectively prevents damage to the pump due to overload, improving system stability.
• High Requirements for Materials: It has high requirements for magnetic materials and magnetic circuit design, but the technology requirements are relatively low.
• Convenient Maintenance and Inspection: Due to the lack of mechanical seals, maintenance and inspection work is reduced.

Working Principle of Magnetic Drive Pumps

Magnetic drive pumps use a drive magnet and an inner magnet connected to the impeller to move the fluid through a sealless containment. Its operating principle is to rotate the liquid impeller through a balanced magnetic field, avoiding the direct drive connection found in conventional centrifugal pumps, thereby reducing the possibility of failures.

Centrifugal pumps use centrifugal force to move the fluid. The fluid enters the impeller through the inlet. Then, the fluid is captured by the impeller blades as the impeller rotates. The blades mechanically rotate the fluid, “flinging” it to the outside of the impeller and toward the discharge port of the pump liquid end. This mechanical movement of the fluid generates the pump’s discharge pressure. Variables such as the inlet fluid supply pressure, impeller diameter, motor horsepower, and the relationship between the enclosed and open faces affect the pump’s flow rate and pressure.

Magnetic drive pumps use a balanced magnetic field to generate rotation of the fluid impeller. Unlike conventional centrifugal pumps that have a direct drive connection between the impeller and motor, magnetic drive pumps eliminate the direct drive mechanism and substitute a magnetic field instead. A drive magnet is mounted to the end of the pump shaft and aligned with the outer side of the back cover. An impeller is connected to a smaller magnetic assembly and mounted on an inner shaft and bushing assembly. (All liquid end components are isolated within the pump liquid head, requiring no mechanical seals.) The smaller magnetic assembly is mounted within the magnetic field center of the drive magnet. Although these two magnetic assemblies are separated by the back cover, the magnetic fields are aligned. When the pump motor starts, the drive magnet begins to rotate. As the drive magnet rotates, its rotating magnetic field acts upon the inner impeller magnet. As the two magnets begin rotating together, the impeller begins turning and discharging the fluid.

Applications and Advantages of Magnetic Drive Pumps

Magnetic drive pumps have wide applications including chemical processing, pharmaceutical manufacturing, water treatment, semiconductor manufacturing, electroplating industries, and spray coating industries. The main advantages are:

• Increased Productivity The innovative design of magnetic drive pumps eliminates the need for mechanical seals, providing a leak-tight containment and lowering costs and labor over the entire lifespan of use.
• Safety Improvements Magnetic drive pumps significantly reduce leakage, lowering the risk of worker exposure to hazardous materials and improving overall facility safety.
• Pollution Prevention Through their leakproof design, magnetic drive pumps reduce harmful emissions, allowing companies to comply with health and safety standards.
• Corrosion Resistance Magnetic drive pumps demonstrate superior ability to handle highly corrosive and hazardous liquids suitable for high corrosion environments.
• Simplified Selection The design of magnetic drive pumps simplifies the pump selection process, making it easier to choose a pump suited for the intended application.

QEEHUA PUMP: A Reliable Manufacturer of Chemical Pumps

QEEHUA PUMP is a leading and reliable manufacturer of chemical pumps and chemical pump filters. Core products include magnetic drive pumps, mechanical seal centrifugal pumps, vertical pumps, and chemical pump filters. Key features include:

• Comprehensive Certification: ISO9001, ISO14001, CE, SGS and other certifications to ensure product quality and manufacturing process reliability.
• Global Service: Highly qualified pre-sales and after-sales engineering teams serving over 10,000 customers in more than 30 countries worldwide.
• Wide Applications: Products used in PCB, electroplating, coatings, surface treatment, semiconductor, chemical and pharmaceutical, exhaust industries.

?? ?? ?? #qeehua #qeehuapump #chemicalpump #chemicalfilter #pumpsoluction