PV Tracker Drive Unit------Linear Actuator

New Design, New Linear Actuator.

1, Bronze Nut: More strength and longer lifetime cycles.

2, New Gearbox: fully enclosed design and lubricant grease will be filled with gearbox so we make sure that all gears is operating in the environment of grease.

3, Stronger Gears: Gears’s materials must be steel and not powder metallurgy. Besides, gears should be heat treatment and its hardness is very high so its lifetime will be much longer.

4, IP66 protection grade: waterproof and dust-proof.

5, Dynamic Load is 25KN and Static Load is 80KN.

6, Diameter of inner tube is 45mm and thickness is 3mm.

7, Warranty is 5 Years.

8, 25 Years design life.

9, DC motors design is replaced and you should replace one time during the lifetime of 25years.

10, Speed at full load is 1.6~1.8mm/s.

11, Stroke can be 300~1,200mm.

12, Connector: CN Linko, Weipu, or Customized by Customers.

13, Inner Limit Switches(it is waterproof and oil proof).

14, Operating Temperature is -40 degree to +80 degree.