Pulley Lagging
REMA TIP TOP African Group
GERMAN ENGINEERING // MADE IN AFRICA // FOR AFRICA
Pulley Lagging has the ability to save the user significant amounts of money in terms of protecting the pulley shell and increasing grip between the pulley surface and the belt, at the correctly applied take-up tension.
In the next section, we will be diving into our full Pulley Lagging product range with an in-depth description of each.
Our Pulley Lagging Portfolio explained
REMA TIP TOP lagging has been installed on some of the most demanding applications across the African continent. REMAGRIP? and REMALINE? contain a CN bonding layer that, when matched with SC2000? or SC4000? adhesives, results in high initial tack and unsurpassed adhesion values, whether installed on-site or in the workshop.
REMA PERFORMANCEgrip 70/CN
The premium pulley lagging material REMA PERFORMANCEgrip 70/CN is a true all-rounder. This premium pulley lagging material can be used as a lining material for driven and non-driven pulleys in the wet as well as in dry processing and can withstand the heaviest operating conditions.
The profiling allows a high capacity for dirt absorption and in combination with excellent abrasion resistance and improved elongation to break, long service life is achieved. REMA PERFORMANCEgrip 70/CN is suitable for high tension and critical pulley applications.
REMA PERFORMANCEgrip 70/CN-SL
The premium strip lagging REMA PERFORMANCEgrip 70/CN - SL has excellent abrasion resistance. Improved elongation at break and effective evacuation of water, moisture and dirt.
Its deep diamond profile and additional longitudinal grooves protect drums effectively and ensure stability in conveyor belt operation. The 343 mm width of the flooring strips can be flexibly cut to fit any drum width, both in the workshop and directly on site.
REMAGRIP 50
The universal lagging with high elasticity REMAGRIP 50 has been designed for a variety of wet or dry applications and can be universally applied as a lagging for drive pulleys for low to medium-loaded fabric belts. Thanks to its excellent elasticity, REMAGRIP 50 also features excellent qualities for eliminating material build-up (also for non-driven pulleys).
REMAGRIP 70
The universal lagging for heavy-duty operating conditions REMAGRIP 70 has been designed for a variety of wet or dry applications and can be universally applied as a lagging for driven pulleys for heavy-loaded fabric and steel cord reinforced belts. REMAGRIP 70 offers optimum abrasion resistance, the deep grooving enables it to handle large amounts of dirt and provides a long operating life.
REMAGRIP 70 V
The self-extinguishing universal lagging for heavy-duty operating conditions REMAGRIP 70 V is self-extinguishing and antistatic. It has been specially designed for challenging ATEX operating conditions with high fire regulation or potentially explosive environments such as coal mines or power plants for example. Required adhesive system for antistatic rubber coatings: PRIMER PR 200 and CEMENT SC 4000 black/HARDENER ER-42 or CEMENT SC 2000 black/HARDENER UT-R 20. The product is approved for underground use in Germany and Poland.
领英推荐
REMAGRIP 70 HR
The heat-resistant universal lagging for heavy-duty operating conditions REMAGRIP 70 HR has been designed as a lagging for drive pulleys in challenging operating conditions with high-temperature environments. It can withstand continuous thermal stress of 90°C and even short-term stresses of 110°C. Recommended adhesive system for heat-resistant rubber lagging: PRIMER PR 200 and CEMENT PERFORMANCE 140 HT with HARDENER PERFORMANCE 140 HT.
REMAGRIP 100
The lagging for extremely wet operating conditions REMAGRIP 100 has been designed as a lagging for drive pulleys in extremely wet operating conditions. REMAGRIP 100 offers optimum abrasion resistance, and the knobbed surface enables it to handle extreme environments such as wet operating conditions, clay or other mud-like materials.
REMAGRIP CK-X
The premium quality flagship laggings for extreme conditions The “knobbly” surface of the ceramic tiles provides optimum grip on pulleys subject to high stress. Ceramic material is suitable for pulley lagging, thanks mainly as a result of its specific properties of extremely high wear resistance provided by aluminium oxide (AL2 O3 ). It replaces traditional materials because it provides higher profitability by considerably increasing the service life and the efficiency of pulley laggings.
The benefits of our Pulley Lagging products:
Contact us today
We will be your one brand, one source and one system for all conveying needs. For more information about our other product ranges and to see what else we can offer you visit our website today.
We hope you enjoyed this read and the product portfolio breakdown of our Pulley Lagging range and stay tuned for the next article explaining how to select the pulley lagging for you, to get a quote today call us on 010 880 4744 or email us at [email protected].
If you are looking for additional conveying products, click the links below to view our individual product portfolios today: