ProSolve Hard Surface Protection

If you need to protect your surface against debris, spills and dust that occurs during painting, building, plastering and general maintenance work, I have just the product for you.

A versatile protection solution such as our ProSolve Hard Surface Protection is perfect. This solution is simple to use and easy to put down. When the job is complete you simply peel the film from the surface and discard – these types of protective films are not reusable.

Remember: Hard surface protectors must not be used for longer than a week if the area is likely to experience heavy footfall or when temperatures are more than 22℃, because it might cause some residue to stay behind.

Application

Applying our surface protection to your surface is quick and easy. All you have to do is simply place the roll on a floor, facing the direction it is to be applied, and unpeel approximately 300m (12”) of film. You then press it firmly onto the floor, then simply continue to unwind the roll whilst pressing down and smoothing the film as you go.

Note: we would recommend checking compatibility in an inconspicuous area first prior to full application. This should be completed with any two materials or chemicals encounter each other.

Limitations

The ProSolve? Hard Surface Protection solution is a great product which works well on virtually every surface. It is important to ensure the surface protector is firmly stuck down prior commencing work.

If left for any an extended length of time, then all hard surface protectors could leave a sticky residue on some surfaces. This can be easily removed by cleaning with warm soapy water. We highly recommend that any residue is removed within 4 weeks to avoid residue becoming difficult to remove. It is also essential to not use underfloor heating whilst using hard floor protectors and ensure that any underfloor heating has been switched off 24 hours prior to use.

Warning

Remember that a hard floor remover is likely to become slippery when wet, please mop up any spills immediately and replace any protector as and when needed.

Contact me

If you a looking for a great surface protection to sell (hard surfaces, glass or carpet), then please contact me for a chat.