The production process of biological organic fertilizer is introduced

The production of bio-organic fertilizer needs to be carried out according to the relevant processes. The main processes are as follows:

1. The general dosage of selected strains is 0.2%--0.5%.

2. Raw and auxiliary materials preparation and requirements:

A, main ingredient: fruit slag, slag dry bagasse, edible fungus, lees, slag brewer's grains, sugar, vinegar residue, starch, cassava dregs, slag slag, soy sauce, monosodium glutamate, citric acid slag slag, slag powder, tofu, medical, diesel, oil cake meal, bran, cotton, rapeseed meal, feed mildew, mud, mud, slaughter scraps, sugar mill brewery slag Shao (Gan) water, leftovers, animal manure and other bulk materials.

B. Supplementary materials: various crop straws, leaves, weeds, melon and vine, straw, pine shells, peanut shells, sawdust, rice husk powder, litter and other dry, pulverized, high carbon can be.

C. Main ingredients: auxiliary materials =5:1-3:1.

3. The water should be controlled at 60-65%, the materials should be agglomerated to give water, the bacteria, main materials and auxiliary materials should be mixed uniformly, the ambient temperature should be above 15℃, the primary materials should be no less than 4 square meters, the width should be 1.5 ~ 2m, the height should be 0.6m, the length should be unlimited, and the pores should be opened in the reactor.

4. Starting tipping at 50℃, once a day, if the stacking temperature exceeds 65℃, tipping again, the temperature is controlled below 70℃, the stacking temperature is reduced, the material is loose, there is no original odor of the material, and there is a little ammonia taste, and white mycelium is generated in the stacking, which is ripe.