Prevent Injuring from Table Saw Kickback

Table saw kickback injury is the major hazard for woodworkers. Table saw is indispensable to the woodworker because without it. They cannot do any other work. It is very important they must figure out the best ways to prevent injuries that are often associate with it. If you are a woodworker, you must explore various ways of preventing those injuries that are associate with a table saw kickback.

The term kickback is referring to those woods that propelled out accidentally towards the direction of the operator during wood cutting. This kickback is very dangerous, because it moves at a fast high speed. There is a severe trauma associated with it when the wood kickback affects the torso, the chest, as well as the head and other parts of the body. Sometimes it can cause the operator to pull his hands towards the table saw and the consequences can be very severe.

If you are a woodworker, your major priority should be to know how to prevent table saw kickbacks. It can help you a great deal to prevent it if you actually know what causes the problem. Whether you know the cause, or you do know it, there are simple things that you can do to prevent the problem and here are some of them.

Using Riving Knife

The first thing that you can use to prevent table saw kickback is by using a riving knife. Usually this tool comes with your table saw. When you insert it into the saw, it locks inside. Once it is there, it would prevent the woods from escaping behind the back of the saw and injure the operator in the process. It drifts the wood away from the fence.

Splitter

Another method you use to prevent table saw kickback is the splitter. This is an alternative, but it is not better than the riving knife. It is a nub and meant to stick up. It serves the same purpose, which riving knife serves. The major thing is that it can prevent the woods from getting back to the blades.

Push Stick

Another option to prevent table saw kickback is the use of a push stick. You can use this push stick instead of using your hands to push the woods back the blade. This is the easiest method than the others because you can easily make this stick for yourself, and you can buy one at the market as well.

Always use blade guard

Some important safety tools come with the table saw when you purchase it such as the guard. It is important that you use this always while you work with your table saw. The blade guard and riving knife are provided and you must ensure that you use them so that they can serve the purpose for which they were provided. If you do not install all those safety tools like the riving knife, ensure that you install it before you begin to use it for the first time.

Avoid using table saw fence for crosscuts

If you want to prevent a table saw kickback injury, you must avoid using the table saw fence for crosscuts. There could be a problem. There is the likelihood that the board could be pinched between the fence and the blade, and it could be thrown back at you. Before you begin to use these woodwork tools, it is important that you learn how to use them to avoid unnecessary accidents that are associated with those tools.

Table saw kickback prevention?

When you want to cut, you should avoid woods longer than it is wide. The shorter side should not be against the fence. Anytime that you want to cross cut with your table saw, you should use your crosscutting sled or the miter. Furthermore, you should avoid cutting bowed, wet, and twisted lumber. Ensure that the wood is in order before you begin to cut it so that you can avoid table saw kickback injury.

When you want to cut, you should position yourself the correct way. Position yourself to the left or to the right of the miter saw. It is not advisable that you position yourself directly behind the table to prevent injury. Most importantly, you must not allow others particularly bystanders to stand or to walk behind you while you cut with the table saw. Such kickback can injure such a person.

Avoid putting your hands directly to the circular saw

You should not for any reason put your hands directly or behind the circular saw. It could result in your finger cut. These are some safety tips that you can implement today to prevent table saw kickback injuries.