Precautions for Using Pogo Pin Connector

Pogo?pin connector is made up of pogo?pin and plastic.It belongs to Precision hardware parts.

Please pay attention to the following 4 points when using pogo?pin connectors:

1.?The contact orientation of pogo pin connectors??

The working direction of the pogo?pin connector should be vertical to avoid force on the spring loaded pin connector from the side and other non-vertical directions.

2.?Contact pieces or FPC gold fingers paired with spring thimble connectors must not be dirty, oxidized, etc.

1) There should be no residual sealing fluid;

2) There should be no other dirty residues;

3.?The compression amount of the spring loaded pin connector is generally 2/3 of the total stroke. If the pressure is too small, the positive force is not enough, which will lead to unstable impedance. If the pressure is too much, the nozzle will be damaged, resulting in pinning. During the assembly process, care should also be taken to avoid damaging the nozzle of the pogo?pin connector, resulting in pinning.

4.?The head and nozzle of the pogo?pin connector should avoid touching the plastic barrier during assembly and use.