Hitachi Energy Indoor MV / HV / HT capacitor banks are used in distribution network from 3.3 kV to 36 kV. There are filter installations, shunt and series compensating installations all over India, both at power utility companies and in industries.
- Capacitor Bank is built with single-phase / three phase capacitor units mounted in hot-dip galvanized steel racks. The capacitor units may be mounted vertically, but are normally horizontally mounted to fully benefit from their compact design. The units are connected in series and parallel to achieve the desired voltage and power rating.
- The banks are built either by placing the racks on top of each other, with any necessary insulators in between, or with the racks placed side-by-side, depending on the space available at the installation site.
- An unbalance current transformer is supplied as standard when the capacitor bank is Y-Y or H connected.
- Capacitor Bank is supplied with internally fused, externally fused or fuse less configurations depending on the bank’s voltage and power level.
