The Pneumatic Rubber fender testing Standard

Pneumatic Rubber Normative references

The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of the seublications do not apply. However, parties to agreements based on this International Standard are encouraged to.nvestigate the possibility of applying the most recent editions of the normative documents indicated below. Forndated references, the latest edition of the normative document referred to applies. Members of ISO and IEC.maintain registers of currently valid International Standards

ISO 34-1:1994. Rubber vulcanized or thermoplastic-Determination of tear strenath -Part 1: Trouser anale andcrescent test pieces

ISO 37:1994. Rubber, vulcanized or thermoplastic-Determination of tensile stress-strain properties

ISO 188:1998, Rubber, vulcanized or thermoplastic-Accelerated ageing and heat resistance tests

ISO 815:1991. Rubber vulcanized or thermoplastic-Determination of compression set at ambient. elevated or low temperatures

ISO 1382:1996, Rubber —Vocabulary

ISO 1431-1:1989, Rubber, vulcanized or thermoplastic-Resistance to ozone cracking-Part 1: Static strain test

ISO 7619:1997, Rubber-Determination of indentation hardness by means of pocket hardness meters.

ISO 12236:1996, Geotextiles and geotextile-related products — Static puncture test (CBR test).


All pneumatic rubber fenders will test as per above standard.

Florescence is an ISO9001 company and all fenders compliance ISO 17357 and above ISO standard.

图片无替代文字

Florescence pneumatic rubber fender BV CCS and ISO certificate:

图片无替代文字


要查看或添加评论,请登录

社区洞察

其他会员也浏览了