Plastics Reduction
Plastic waste is fast becoming a widely recognised problem. While it is an important material for our economy, providing multiple benefits to modern day living, plastic can take thousands of years to biodegrade.
Producing plastic increases carbon emissions and around 80-90% are made from fossil fuel resources. For example, creating bottled water takes 2000 times the energy than it does to produce tap water!
It takes up valuable space in landfill sites and is polluting the natural environment, having a significant impact on our oceans. There is an estimation that more than 8 million tonnes of plastic are in our oceans, so much so that the prediction by mid-century will be that plastic weight will match the weight of the amount of fish in the sea.
Over 300 million tons of plastic is produced every year and nearly half would be considered for single use only.
However, plastic is an important material used widely throughout industry, but it’s now becoming a more prominent problem when it’s apparent that it can take thousands of years to biodegrade. It’s impossible to remove plastic from industry, but as a socially aware company, Schiedel have already taken steps to reduce the amount of plastic used within their factories, particularly in the UK
Reducing Plastics in the Washington Plant
A team was put together by Schiedel to identify and reduce the amount of plastic used within the Washington manufacturing plant.
The Washington plant produces steel flues and components for the stove and chimney industry; residential and commercial applications.
Like many manufacturing plants and related businesses, Schiedel’s output includes:
- Products sent out via cardboard.
- Parts packed in plastics
- Sales volumes, when increasing, means more packaging.
The team came up with several questions including:
- Identify the materials and the yearly usage.
- Challenge their current suppliers or alternative suppliers if there was an alternative product that could perform the same, but with less material content.
- Identify any positives or negatives if potentially using an alternative material
- Carry out the physical tests with the alternative products and document results
- Collate data analysis on current materials versus proposed materials based on positive outcome of trials
- Establish final benefits of new material from a cost and environmental perspective
Identifying and Initial Trials
One area identified was the amount of plastic wrap used when transporting flexible liners.
Three machines within the plant produce the flex liner, which is then rolled around a machine, which wraps the plastic around the flex. This is to avoid any unnecessary weather damage and assists in wrapping the product tighter to allow more product to be transported.
An initial trial was carried out in March 2019, where two of the three Schiedel machines wrapped the flex using the new packaging and the existing packaging.
The new packaging was supplied by Kite.
- The existing packaging, a 9-meter pack, weighed approx. 570grammes
- The new packaging, the same 9 meters, when weighed was approx. 200grammes
- A further wider test was carried out a month later
- We measured the number of rolls used in a shift versus the old-style wrap
The results showed a considerable saving and reduction
- Reduction in plastic
- Reduced changeovers in machinery
- Considerable cost savings
- Increased output
- Reduction in manual handling of rolls by 65%
- Less handling more safety
Conclusion
Scott Roberts, Production Manager was more than pleased with the results:
“Speaking to the flex operators, they have more confidence in using the original proposed 15.5 micron wrap by KITE as they feel it covers the flex better & they can fully utilise the rolls (especially as the manufacturing point in which they have to put the initial first layer of wrap on the end of the flex which has a lot of spring back).”
This is just one of the many ways that Schiedel are looking to reduce their carbon footprint, which was acknowledged by a Kite Packaging Certificate (below).
However, the reduction is an ongoing process and we hope this information can encourage other companies to do the same.
Project Team
- Helen Wakefield - Procurement
- Scott Roberts - Production Manager
- Frank Gorog - Flex Line
- Michael Ryan - Flex Line
- Kite - Supplier of materials supported with their engineer
Article written by Davinder Sangha - website version available here