Plastic Agglomerator, Milling Machine, Plastic Squeezing Dryer Machine, Crusher Blade Sharpener Machine, Pipe Belling Machine
辅助机械
辅助塑料机械对废旧塑料进行回收再生产，一般根据客户要求，不是必须采购设备。
Auxiliary Machine
Assist the main plastic machines, to recycle and reprocess the waste plastic. They can be purchased according to customers’ requirement, not necessary.
- 塑料团料机/泡料机
化纤团粒机适用于塑料化纤（PP/PE塑料薄膜，PET聚酯废丝，PET聚酯薄膜，涤纶废丝废布头、丙纶废丝废布头）回收后造粒，具有高速造粒，是造粒机的必备设备之一，可满足不同产量要求。
化纤团粒机利用摩擦生热原理，可对各种形式的热塑性薄膜直接进行破碎一次成粒，是一种使废旧塑料变废为宝的理想、快速的塑料辅助机械。 将废弃的热塑性塑料薄膜及壁厚小于2mm的制品进行直接造粒，它可对软聚氯乙烯、高低压聚乙烯、聚苯乙烯，聚丙烯及其他热塑性塑料的废弃制品或薄膜进行团粒，亦可对发泡聚苯乙烯的废弃制品进行团粒。
化纤团粒机以三相异步电机为动力，通过三角皮带传动，使紧固动刀盘上的动刀与紧固在锅体上的定刀形成旋转剪切。可对放入锅体内的热塑性薄膜进行反复破碎，同时由于转刀盘高速旋转，使被破碎的塑料片在离心力的作用下形成涡流状态。再利用物料间及物料与锅体壁间产生的摩擦热使物料轻微塑化，然后加水剧冷从而使物料冷团成粒。
- Plastic Agglomerator
Usage:
Chemical fiber agglomerator machine is applied for plastic chemical fiber (PP/PE plastic film, PET polyester, PET polyester film, polyester silk cloth, silk cloth waste polypropylene waste recycling) recycling and granulating, high granulation, is one of the necessary granulation equipment, it can meet different production requirements.
Using the principle of friction heat, it can crush and granulate various forms, thermoplastic film directly one time, which is ideal and fast auxiliary machinery. The waste products of thermoplastic plastic film and a wall thickness of less than 2mm can be granulated directly; it can be used for soft PVC, low pressure polyethylene, polystyrene, polypropylene and other plastic waste products or films agglomerating, and also used for expanded polystyrene waste product agglomerating.
Working principle:
Chemical fiber agglomerator machine with a three-phase asynchronous motor as the driving force, through the triangle belt transmission, make the rotor blades which are fastened on the blades discs and fixed blades on the pot body form a rotary shear.
The plastic film which is put into the pot can be repeatedly crushed, due to the high-speed rotation of the rotary blades disc, the crushed plastic film scraps forms a vortex state under the action of centrifugal force.
The frictional heat generated between the materials and materials between the material and the pot wall of slight plasticization, and then materials are sticked together into granules after cooled by adding water suddenly.
- SWP 系列磨粉机
塑料磨粉机广泛应用于化工、废料回收利用、塑料管材型材制造、塑料改性等领域内各种塑料物料的粉磨加工。按磨粉原理分类，磨粉机主要分转子（涡轮式）磨粉机和磨盘式磨粉机两种。
设备组成
工作部分由一个高速旋转的磨盘和一个固定的磨盘组成. 二、PM磨盘系列磨粉机有以下优点: 1、物料通过时间短,产生热量少,PE等热敏性物料的最佳磨粉设备. 2、磨盘间隙可调整,可方便控制出料细度. 3、磨盘采用优质模具钢材制造,可反复修磨. 4、高产量,能耗低,操作容易等特点.
技术特点
●采用新型刀具结构，提高了产量，并克服了磨PE产量底和粉体粗的特点.
●产量高、磨粉细、节能环保.
●适用范围广，可磨PVC、PE、PS、PA、PC等塑料.
●安装维护方便，打开门盖即可清理.
●粉体大小10～120目可调，且调节方便.
●冷却系统采用风、水结合冷却.
●优质耐磨钢刀具，产量高，耐磨性能好.
●封闭式设计，利用自身风量与风压，将其制好的粉体收集，无粉尘泄漏。
●人性化的调刀，设计理念、定刀间隙调动只须一瞬间，轻松自如。
●本机能在常温下将各种软硬皮革磨制成纤维状：人造革、PVC、PE等不同分子结构的材料磨制成20-80目粉末状，尤其适合塑胶改性。
- SWP Series Milling Machine
Plastic mill machine is widely used in chemical industry, waste recycling, plastic pipes, plastic profiles manufacturing, plastic modification etc plastic grinding. According to the classification principle of milling, milling machine is mainly divided into the rotor (turbo) milling machine and grinder mill.
Equipment composition:
The working part is composed of a high speed rotating disc and a fixed disc. Advantages: 1, the material through a short time, less heat, the best milling equipment for PE heat sensitive materials.
2. Material fineness can controlled by adjusting disc distance.
3. The disc is made of high quality mould steel, can be repeated grinded.
4, High capacity, low energy consumption, easy operation.
Technical features
l Adopt the new blades structure, increase capacity, and solve the low capacity and not fineness problems.
l It is applied for many plastic, such as PVC, PE, PS, PA, PC etc.
l Conveniently installation and maintenance just open the door to clean up.
l The powder size is 10 ~ 120 mesh adjustable, and convenient adjustment.
l The cooling system uses a combination of cooling air and water.
l High-quality wear-resistant steel blades, high capacity, good wear resistance.
l Closed design, using its own air volume and pressure, the powder of good collection, no dust leakage.
l This machine can grind different kind soft and hard leather into threadiness under normal temperature: artificial leather, PVC and PE and other different molecular structure materials into 20-80 mesh powder, especially suitable for plastic modification.
- 塑料挤水机/挤干机
该机器是薄膜类软性塑料清洗后脱水干燥的理想设备。
适用原料如清洗后PE/PP膜, PP 编织袋、PP吨包袋、等。
特点：
1.独特的挤干脱水原理，解决传统膜状或丝状塑料脱水难得问题；
2.制品含水率：2-3%
3.机械式挤压脱水，和原来的热风干燥相比，极大的节省能源；高产量、低能耗
- Plastic Squeezing Dryer Machine
Usage:
Plastic Squeezering dryer machine is an ideal machine for plastic film or other soft plastic dewatering drying after washing.
Applied material: PE PP film, PP woven bags, and PP ton bags after washing.
Characters:
1. Special Squeezing dryer principle, solve film or other filamentous plastic drying problem.
2. Moisture of final product: 2-3%.
3. Mechanical squeeze dewatering, electric heating into half plasticizing. High capacity, lower energy consumption.
- 磨刀机
用途：本机专为塑料破碎机刀片设计,同时适用于其它带有螺丝孔的直刃刀片。它是塑料破碎机的辅助产品，可以大大提高工作效率。
结构特点：机床由机体、工作台、直滑杆、齿轮电机、磨头电机、冷却系统和电气控制部分组成。零件间结构紧密，外观美观，使磨头运转平稳。同时，在各种直刃加工刀具上还具有体积小、重量轻、效率高、操作方便等特点。
- Crusher Blade Sharpener Machine
Usage:
Blade sharpener machine is special designed for crusher blades, and applied for other straight blades which have screw holes for fixing. It is auxiliary machine for plastic crusher, greatly improve work efficiency.
Structure character:
This machine is composed of machine frame, work table, slide rod, gear motor, grinding head motor, cooling system and electrical control part. Compact structure, beautiful appearance, smooth operation of the grinding head. It also has the characteristics of small volume, light weight, high efficiency, easy operation.
- 扩口机
SGK扩口机，配有与主机配套的接料牵引装置和相应的程序接口，既能与挤管主机联线使用，又可以作为单机单独使用；扩管时管材的移动均采 用平移方式，动作平稳准确而且不易损伤管材；这种机型采用红外线加热方式且为双加热炉型，每个加热炉都配有中心加热炉芯；成型方式均采用扩管头定型方式， 管口成型尺寸准确；该机型在控制面板上没有扩溶剂型承插口（直口）和扩弹性密封圈型承插口（R口）的转换开关，扩管方式选择十分方便，工艺适应性强；主要 的电气控制元件均采用进口元件，系统性能稳定可靠。
- Pipe Belling Machine
Usage:
SGK pipe belling machine, equip with pipe stacker and traction device which match with main extruder and corresponding program interface, can be used with main extruder, it also can be used as a single machine.
Working principle:
1. Pipes are moved in translation when be expanded, accurate and smooth action is not easy to damage the pipe;
2. This machine adopts infrared heating mode and double heating furnace, each heating furnace are equipped with central heating furnace core;
3. Molding method adopts expanding pipe head shape, forming orifice size is accurate;
4. The models in the control panel without expanding solvent type socket (direct port) and expanding the elastic sealing ring type socket (R) switch.
5. Expanding way is very easy choice, strong adaptability; electrical controls of the main components are imported components, the system performance is stable and reliable.
