The Plasma Generator

The Plasma Generator, the secrets soon to be reveled.

Yes up for grabs read why.

?In LinkedIn, I would like to thank all of my follower, in returning to England I have been re-looking at my situation.

I was hoping to get Bayliss Power registered here but that is no longer the case due to a number of situations.

I am able to still continue here with some of my small projects, the Home Generation, this has been successfully run, but it now required a modification new build, this will continue.

I was also interested in the home heating, and the way it has and is still being done here.

Now they, government and others want to change it, even try to force people into having the expansive and uneconomical heat pumps. Oh, to clarify this the heat pump can be looked at several ways, ground, or water heat pump. The one that has been used in Australia for many years as a reverse cycle air conditioner, in Tasmania now commonly known as the heat pump.

For you here in Britain stay away from them, you have the best system, hot water closed circuit radiator. Now all done by what I have now discovered as to be the ‘combi boiler.

Heated circulated hot water, and hot water on demand. The problem is that just about all of them are using gas. There is one that uses a standard immersion element heater. I was doing investigation into the induction heating, and yes there in now one in the form of a combi boiler just about the same size, use this it has to be cheaper than the ‘element type, I am investigating this, and building one to prove a point.

Sadly in my position without a good outfitted workshop with a compressor, I will not be able to continue with the Plasma Generation project.

I have come to a decision to see if there is any one or company want to take on the project and first to check here on LinkedIn. I would like to still be part of the project and offer any assistance to get it up and running. They would have full access to anything that I have to helping getting it up and running, and the IP would also be theirs, a small donation for this help would be appreciated.

If no further interest in the project I will be putting it on the open web and sell the plans with some basic knowledge of how to get it running.

The shipping industry would benefit the most for this project, as I have outlined in my articles here on LinkedIn.

The next if you wanted to make some real money from the project would be the waste industry, as in MSW and plastic waste, zero emissions.

The example done for the Australian market, the net profit from even a small 140ton a day plant was $au4,609,007 per year that includes paying all taxes and running costs. This could be from light diesel low sulfur, or maybe more for JET ‘A’ low sulfur fuel. ???

?The 1,000 ton a day plant the profit is astounding, and can be checked remember it is Australian dollars, $au781,378,395 net profit per year.

?The next would be the power generation not as much profit by a long way but when you island is surrounded by sea water and you have good rivers, you can have all the cheap power that you want and all zero emissions, and only using water.

It can be from waste water, river water. Sea water can be used with a desalination plant also run on the plasma generator system.

I have plans and drawing to show all of this to any one or company that want to take on this project before I let it out to the general world web.

?The implication of it going onto the world web is China would be I expect the first fully benefit, and even Russia.

There is also something else that I have learnt from all the testing that I have done, it is so close to being very dangerous as in proton collisions.

The other is plasma fusion, Hydrogen fusion as the main output I has been explained to me the unit output was Atomic Hydrogen plasma, this was by two scientist one that know the project and from the other that he discussed it with.

I have also found out in only the last few weeks, that just a small injection of Deuterium was introduced it could be a massive break through, I have also now know how to get the output even hotter.

?The cost of the actual unit if re done as per the way that I intended, would be less than ￡1,500, then the cost of the new power supply another ￡1,000.

A compressor to run it, 40cub/ft/min, and a water pump.

Then the cost of the new steam generator well that has been costed in Au dollars, this has no boiler, and is supercritical fluid, (water).

I will leave this on the site for a while before it goes to the web.

Once again I would like to thank all my follower.

Anyone seriously interested please leave a contact email in the comments. I will answer them.

?Brian Bayliss