Pipelines codification in P&ID's
https://arvengtraining.com/en/pipelines-codification-in-pids/

Pipelines codification in P&ID's

All pipes are represented in?Piping and Instrumentation Diagrams (P&IDs)?by lines, with an alphanumeric coding that allows identifying them for subsequent?design?(routing, thermal stress analysis, supporting, etc.)?and purchase.??

There are no?rules to stablish?universal coding; they depend on each project. Although they include basically the same information, the way they are represented differs. As an example, it is shown a?typical line numbering?with its characteristic information:

AA-BB-CC-DDDD-EEEE-FF

(e.g.: 4”-FG-03-0035-A1A1-HC)

  • AA: nominal diameter, in inches(“) if ANSI rules apply or millimetres if we talk about EN-ISO. This diameter is not necessarily coincident with the pipe external or internal diameter, which will depend on the schedule, material type and rating (e.g.: 4 inches)
  • BB: fluid code, to distinguish the service for which the pipe is used for (e.g.: fuel gas)
  • CC: Unit number,?since several Plants may exist in the same industrial complex (e.g.: Unit number 03).
  • DDDD: line number.?They are assigned sequentially (e.g.: 0035).
  • EEEE: pipe class.?It collects characteristics such as material type, rating, flange type and corrosion allowance (e.g.: carbon steel, 150#, FF flanges, C.A. 1.6 mm).
  • FF: insulation code, due to different requirements such as heat or cold conservation, tracing, jacketing, personal protection, etc. (e.g.: heat conservation).

If you want to know more:

ASME B31 | Piping systems for industrial plants


You can find similar articles?here.

Written by:?Ignacio Vilas

Thank you for sharing Keryn!

回复

要查看或添加评论,请登录

Arveng Training & Engineering的更多文章

社区洞察

其他会员也浏览了