An Overview of Heliports and it’s Types
The pads may be made from steel, concrete, or aluminum. In places like hospitals, golf courses, skyscrapers, and private buildings, helicopter landing pads are commonly found. The ground or an elevation can be used to build heliports. A rooftop or elevated structure can be used for an elevated heliport.
Features of Heliports
1. Heliports can be split into four basic divisions: Final Approach and Takeoff Areas, Touchdown and Liftoff Areas, safety areas, and wind cones.
2. Final Approach and Takeoff Areas are areas over which a pilot completes the final phase of an approach to land or from which he departs. The Touchdown and Liftoff Area is a load-bearing, paved area usually located within Final Approach and Takeoff Areas, where helicopters perform touchdowns and takeoffs.
3. A helicopter's type and rotor diameter determine the size of the Touchdown and Liftoff Areas. Square, rectangular, and circular Touchdown and Liftoff Areas are all possible.
4. Heliports will all have a Touchdown and Liftoff Area. Touchdown and Liftoff areas can be located within or outside Final Approach and Takeoff Areas.
5. Heliports on the ground are typically made of cement concrete with a minimum thickness of six inches.
6. Heliports are categorized based on their purpose. Hospitals, for instance, have an H painted in red with a cross outlined in the background. White is painted on all other heliports.
7. The maximum weight that can be handled by each heliport can be seen on it. Additionally, it must specify the maximum dimensions of helicopters permitted to land.