Operation tips of climatic chamber
Robin Wang →Climatic chamber, EV battery test chamber
Climatic Chamber | Environmental testing | EV battery test solution | Reliability test | Battery testing | Vibration test | Laboratory equipment supplier at Guangdong Sanwood Technology Co.,Ltd
1. Do not use if climatic chamber is found damaged or deformed when unpacking.
2. To prevent electric shock or malfunctions, do not turn on the power until installation and wiring are completed.
3. This climatic chamber is non-explosion-proof products, please do not use it in environment with flammable or explosive gases.
4. When installing climatic chamber, be careful not let dust, thread, scrap iron or other things enter, otherwise fault will occur.
5. It is forbidden to disassemble, process, modify or repair our climatic chamber without authorization. Otherwise, there will be danger of abnormal operation, electric shock or fire.
6. The body of the ventilation holes to be kept open, so as to avoid failure, abnormal movements, reduced life expectancy and fire.
7. During test, please do not open the door of climatic chamber. Once open,high temperature may cause burns to the operator, open in low temperature may be frostbite staff on the ground and may cause the evaporator icing, affecting the cooling effect. If you have to open, please do some protective jobs before opening.
8. The wiring must be correct, must be grounded. Ungrounded may cause electric shock, accidental malfunction, abnormal display or measurement error.
9. The internal parts of climatic chamber has certain life span. For continuous and safe use of this chamber, please carry out regular maintenance and repair.
10. During operation, the power inlet terminal cover must be installed on the terminal board to prevent electric shock.
11. Please fully consider safety precautions before operation such as modifying setting, signal output, starting, stopping and so on. The wrong operation will cause the working equipment to be damaged or malfunction.
12. Regularly check the terminal screws and the holder, please do not use if screws loose.
13. Wipe the chamber with a dry cloth. Do not use alcohol, gasoline or other organic solvents. Do not splash water on it. If climatic chamber is immersed in water, stop using it immediately. Otherwise, there is danger of electric leakage or electric shock or fire, or even damage.
14 In order to avoid failure, please provide the power supply within the rated voltage range, for the safety of the machine, but also for the safety of the operator.
We have a series of standard climatic chambers, please refer to attached picture.
