Node MCU ESP8266

Hii,

what's up guys;-)

Actually, This is my first attended webinar on Node MCU ESP8266

what is Node MCU ESP8266?

ESP8266 is a low cost wi-fi chip with a full tcp/ip stack and MCU talking about an MCU? inside this board that means we can upload a program in this MCU to control it GPIO board this board was first produced by shanghai-based a chinese manufacturer expressive system ?but first apperance of this sheet was in August 2014 with the ESC one module made by a third party manufacturer and this small module allows medical controllers to connect to a wi-fi network and make a simple tcp/ip connections using hey spike man so it is amazing to have all these options in one dash boards.

How to get started with Node MCU ESP8266 for beginners?

For beginner i could recommend to get one from gearbest online store .It's small in size almost similar to an arduino nano so you can easily place in your project the board comes with the ESP module on the top and it's GPIO in both sides so about the pin out as you see it's similar to an ardunion or any other development board device we have digital i/o pins the PWM output the serial communication ports but there is a lack of analog converts because we have only one analog input ,on-board reset button and flash button also you can ?test your board using its onboard LED connected to digital pin zero and the board has a USB connector so you can plug it directly to your computer in order to program. Than go to silicon Labs comm and download the appropriate driver (which present at the back of NODE MCU). Extract the file and install it. Find the port in which the board was linked it moving now to test the board by blinking that led and in order to do? this we will use the arduino ide and it will be a simple arduino api programming like digital read and digital write etc.