New Way to STOP PULLING SLUGS In Your Stamping Dies
This portable machine puts SlugKeeper grooves in to the die wall that prevents slugs from pulling back onto the die block. The newly upgraded version now features a microscope and tablet with display. The unique device uses a pneumatically-powered grinder to precisely machine a small angled groove into the sidewall of the die cavity in a stamping die to prevent slugs from pulling onto the die surface where they can damage to the production strip, the stamped part or the stamping die itself.
DTC Products SlugKeeper machine has one thumb screw for quickly adjustment of the grinder height, a plunger style grinder head assembly, and a grinder head adjustable depth stop to control the grinder’s depth into the die cavity. Each of these features helps the operator quickly and more accurately position and control the grinder position.
The grinder assembly is adjustable to three height positions, each ? inch apart, enabling it to work with a wider range of part thicknesses, and features flex lights which the operator can position to see clearly into the cavity, providing better visual inspection of the work area when not using the new microscope and tablet system.
The grooving wheels come in 4 diameters, in both borazon and diamond, to ensure the proper diameter groove is being placed into the side wall of the die surface of all materials. The micrometer adjustment accurately controls the depth into the side wall of the cavity. This allows the machine to be used for all types and thicknesses of material that are stamped in stamping dies. With the ability to adjust the angle (from 0 to 5 degrees) the grooves are placed at the precise angle to create the correct amount of interference, which keeps the slug from pulling back on to the die surface during the stamping operation.
owner at mark signs
7 年what are u going to do with all the money your making
owner at mark signs
7 年Looking good, turned out nice jeff, did a real nice job with this