New Vacuum Components Range, Indexing Plungers with Chamfered Pin, Oil Plug, Retaining Magnets and Holding Disks in Hygienic Design
Elesa+Ganter India
World leader in the design and manufacture of standard machine parts
New Vacuum Components Range
The vacuum components can be used in various industrial sectors, allowing the gripping and manipulation of products and packages of multiple shapes and sizes. Vacuum cups can be used on surfaces with different roughness, guaranteeing variable lifting forces. The range include executions with high grip, suction cups for packaging, vulcanized components with increased resistance to traction and reinforced bellows suction cups for particularly heavy loads. Suction cup holders are available with different executive forms, in different materials and with variable effective strokes.
Indexing Plungers GN 824 with Chamfered Pin
Indexing plungers GN 824 have a plunger pin with square cross-section, a latching surface on one side and a chamfer on the other. When the object to be secured moves towards the chamfer, the plunger pin is pushed back into the guide, allowing grooves and edges to pass over the pin. The latching can be released by pulling the knob.
Type C / CK indexing plungers with rest position are used for applications when the plunger pin is temporarily not to engage. In that case, the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.
THR-LP Oil Plug for Manual Tightening
The THR-LP oil plug for manual tightening, made of glass-fibre reinforced polyamide-based technopolymer, is equipped with a retaining chain to prevent loss. The elastic fork, housed in the special groove of the cap, can rotate freely.?
The spiral ring connects the elastic retaining fork to the chain. In addition to guaranteeing the OR-ring retention, the seat for the housing allows an optimal seal even with minimum tightening torques. Maximum continuous working temperature 60°C.
领英推荐
Retaining Magnets and Holding Disks in Hygienic Design
Retaining magnets GN 5080 and GN 5090 are designed for use in hygienic areas. The sealed screw-on surface enables mounting without dead spaces; the impervious geometry in combination with the high quality finish prevents dirt from accumulating and facilitates cleaning. Holding disks GN 7080 and GN 7090 are used as counterparts for retaining magnets when these are used in combination with non-magnetic materials or when the holding force needs to be increased due to thin material.
Standard Machine Elements Worldwide
? Elesa+Ganter 2024
ELESA + GANTER INDIA PVT LTD
A-54, Sector-83,
Noida - 201305 (UP)
Phone: +91-120-4726666