NEM-3 “Net Billing” Tariff Revised Proposed Decision (November 2022) – Summary of key issues, What it means for Solar and Storage Economics
Energy Toolbase
Energy Toolbase provides a cohesive suite of software products to model, control and monitor Solar and Energy Storage
The California Public Utilities Commission (CPUC) released their much anticipated, revised Proposed Decision (PD) on the state’s “NEM-3” successor net metering tariff last week. The newly revised PD establishes a “Net Billing” tariff that introduces an entirely new framework for valuing exported energy. The new methodology will reduce the value of exported energy by roughly 75% compared to NEM-2 levels and completely decouple the value of imported and exported energy. This will considerably erode the value of solar-only projects and create a strong price signal for pairing energy storage with solar.?
This revised PD comes almost a year after the initial December 2021 PD ruling, which was withdrawn after widespread criticism, including an acknowledgment from Governor Newsom that the PD needed to be reworked. The newly revised PD contains a few key improvements from the original PD. Most notably, the new PD completely removes the Grid Participation Charge or solar tax, which sought to levy discriminatory fees on solar customers based on their interconnected PV system capacity. Additionally, the new decision removes the highly controversial language that sought to retroactively shorten the grandfathering period for “NEM-1” and “NEM-2” customers, thus preserving grandfathering for 20 years. These changes are victories for the rooftop solar industry, which lobbied hard to improve the PD over the last year, led by the California Solar and Storage Association (CALSSA) and the Solar Energy Industries Association (SEIA).?
Key Issues of the New NEM-3 PD
Export Compensation Based on Hourly ACC Values?
The value of exported energy will be compensated based on hourly Avoided Cost Calculator (ACC) values averaged across days in a month, differentiated by weekdays and weekends (e.g., 4-5 pm will hold the same value on each weekday within the given calendar month). This proposal mirrors the language from the original December 2021 PD.??
"Glide Path" - Export Adder
The?revised PD proposes?an?“ACC Plus”?adder, which?would?increase the?export value during the first 5-years of NEM-3?to transition the market to the new tariff gradually.?The table below specifies the ACC adder values based on market segment?and utility.??
NEM-3 Implementation Timeline
The earliest date the revised PD could be voted out is December 15th. NEM-2 enrollment will end 120 days after the PD is finalized. This means the earliest possible NEM-3 cutover date is April 14th, 2023.?
领英推荐
Residential Electrification Rates
NEM-3 residential customers will be mandated to take service?on a predetermined?time-of-use (TOU) rate,?which?contains?high differentials between peak and off-peak TOU periods. This?rate structure provides strong price signals, encouraging customers to shift energy usage outside?peak hours (e.g., 4 pm – 9 pm). Below?is?the initial set of residential rates required for Net Billing Tariff customers.?
Additional NEM-3 Issues
Our summary above focuses on the most critical elements within the PD. There are numerous other important issues within the241-page Proposed Decision, which we wanted to flag.?
What Effect will NEM-3 have on Project Economics?
Solar.?The value of solar bill savings and the project economics of PV-only projects will get eroded considerably once NEM-3 is implemented. This is caused by the average value of exported energy dropping roughly 75% compared to current-day NEM-2. How much erosion occurs will depend on how much PV is exported to the grid. Solar projects with a high percentage of exports will see the most value loss. Residential projects that size the PV system to meet 100% of annual consumption and export over 50% of their production to grid will feel considerable savings erosion. Whereas a non-residential project that offsets a smaller percentage of consumption will export less and have less value loss.??
Storage.?NEM-3 will create a strong tailwind for the energy storage market in California. Sharply reducing the value of exports?creates a strong price signal for pairing storage with solar to prevent exports and self-consume more energy. Additionally, the new ACC framework creates high hourly export values during certain periods of grid stress (e.g., 7 – 8 pm in September in PG&E will value exports at $2.87/kWh) creating a strong value capture opportunity for storage projects that can export to grid during these premium-priced hours. It is widely expected that storage attachment rates will go way up once NEM-3 is implemented. California interconnection data over the last 3 years shows storage attachment rates ranging between 10% to 15%. In a NEM-3 world, attachment rates will likely go upwards of 70% to 80%. This is similar to the current-day attachment rates in Hawaii which implemented a NEM program that crushed the value of exports back in 2015.??
How to model NEM-3 scenarios in Energy Toolbase
Energy Toolbase users have had the ability to model NEM-3 scenarios in ETB Developer for over a year. We published a blog?and hosted a webinar?after the original December 2021 PD was released. We overviewed how to run NEM-3 scenarios using a method that averages hourly export values over a TOU period. While this method does an adequate job of approximating the value of exports, it does not perfectly account for exported energy the way defining actual hourly ACC values would. This temporary workaround gives users a simple workflow that we believe is upwards of 90% accurate in determining utility bill savings in a NEM-3 world. We would like to encourage users to continue using this method for now. Note: our in-house rates team loaded all the major residential and C&I rate tariffs with ACC values for exports last December when the original PD was released. Our rates team is currently working on loading the latest ‘effective date’ NEM-3 rates with updated ACC export values.?
We are excited to announce that we are in the final stages of implementing a solution whereby exported energy is based on the actual hourly ACC export values. This will enable users to precisely model the value of exports, utility bill savings, and the overall project economics of any NEM-3 project. Our product and engineering teams are currently testing this fulsome solution, which we expect to have live in production in the coming weeks. We will communicate to our user base in California when this functionality launches. Lastly, it's important to note that the PD is still a “Proposed” Decision and has yet to be approved. We will continue to monitor the NEM-3 proceeding and make any necessary updates in ETB Developer based on the adopted final decision.?