MXM-OP-01
Optional module for the springs setting on MXM instruments
Dear Customer,
How many times have you had to set some spring sample and to not have a suitable press?
If you have one of our MXM instruments, you can now use the new MXM-OP-01 accessory, which allows it to be used as a safe setting machine for small lots.
We have always recommended to you to do not use the MXM instrument as a setting machine, but now with the MXM-OP-01 things change.
This system is mounted on the main cell and protect it from wear or accidental damages.
?Features:
?Shock absorber for setting up to 18kN (with the MXM25 model)
Tilting plate to quickly insert even very long springs
?Safety sensor which intervenes if a safety limit load is reached, which can be set between 10 and 18kN.
Functioning:
?From the PMInterface Software it will be sufficient to enable the “setting mode” and enter the necessary data in the dedicated window.
The instrument will perform one or more setting cycles based on what is set, in this mode it is not possible to measure the spring load.
Once 10kN is exceeded the device will begin to compress, avoiding the risk of overloads destined to damage the instrument and the load cell.
?For any further information do not hesitate to contact our sales department at the email address [email protected]