Multilayer Laminating Process Glossary

Multilayer Laminating Process Glossary

1, Autoclave pressure cooker

It is a kind of container filled with high-temperature saturated water vapor, which can apply high pressure.

It can place laminated Laminates samples for a period of time to force water vapor into the plate and then remove the plate sample.

Placed on a high-temperature molten tin surface, its "delamination-resistant" properties were measured.

This word has another synonym for Pressure Cooker, which is more commonly used by the industry.

In addition, there is a “pressurization method” in high temperature and high pressure carbon dioxide in the laminate lamination process, which is also called Autoclave Press.

要查看或添加评论,请登录

Cheryl H.的更多文章

  • What to pay attention to when purchasing capacitors

    What to pay attention to when purchasing capacitors

    Capacitance is one of the indispensable components in modern electronics, from the line to the electronic motherboard…

  • PCB thickness classification

    PCB thickness classification

    The PCB thickness classification includes: Thickness coarse deviation fine deviation 0.5 / +/- 0.

  • PCB copper-clad laminate problems and countermeasures(2)

    PCB copper-clad laminate problems and countermeasures(2)

    Once PCB laminate problems are encountered, consideration should be given to adding to the PCB laminate specifications.…

  • PCB copper-clad laminate problems and countermeasures

    PCB copper-clad laminate problems and countermeasures

    First, we must be able to find It is impossible to manufacture any number of PCBs without encountering problems, which…

  • Wrinkle wrinkles, wrinkles

    Wrinkle wrinkles, wrinkles

    Often referred to as pressure due to the amount of glue is too large. Causes the outer layer strength and hardness to…

  • Scaled Flow Test Proportional Flow Test

    Scaled Flow Test Proportional Flow Test

    It is the method of measuring the amount of glue in the prepreg when the multi-layer board is pressed. It is also a…

  • Resin Recession resin subsidence, resin shrinks

    Resin Recession resin subsidence, resin shrinks

    Refers to the resin of the multilayer board in the film or thin substrate of its B-stage (previously). It may not…

  • Relamination (Re-Lam) Multilayer Lamination

    Relamination (Re-Lam) Multilayer Lamination

    The thin substrate used for the inner layer is made by the substrate supplier using a film and copper foil. After the…

  • Print Through pressure, excessive extrusion

    Print Through pressure, excessive extrusion

    The pressure strength (PSI) used when laminating the plywood is too large, which causes many resins to be squeezed out…

  • Press Plate

    Press Plate

    Refers to when the substrate or multilayer board is pressed together, it is used to separate each group of books…

社区洞察

其他会员也浏览了