Models of Screw Feeders

Screw feeders are one of the most commonly used equipment for transporting bulk solids, which can transport large quantities of granular solids (such as powders, grains, granules), semi-solids, liquids and even non-flowing materials from one point to another. Explain the parameters of the screw feeder for you:

Technical parameters of screw feeder

Feeding capacity: 1000kg/h

Hopper volume: 200L

Loading capacity: 250kg

Feeding height: ≤8 meters

Motor power: 1.5KW-6KW

Tilt angle: standard 45 degrees, can be customized 30 degrees or 60 degrees

Three-phase 380V 50-60Hz

?

Tips for selection of screw feeder

1. Material of screw feeder: carbon steel or stainless steel

The suitable machine material can be selected according to the conveyed material. It is used in the application industries that have requirements on hygienic conditions or corrosiveness, such as flour and animal feed processing, plastics and chemicals, and the pharmaceutical industry. Generally, stainless steel is selected, and carbon is selected for other common industries. Steel material can be used, and the cost is low.

2. The height and length of the conveying

3. Diameter or delivery volume

The larger the conveying volume, the larger the diameter of the spiral

4. Special design

The screw feeder can be designed according to the actual application requirements, such as the distance between the inlet and outlet, the size of the inlet, the distance from the ground, and the angle of the inlet can be customized.

If you can tell us everything you know is the best, it will help to recommend the right screw feeder for you. You can contact me in these ways to get all the information about the machine.

?

The above is an introduction to the parameters of the screw feeder, I hope it can help you.