The matching mold of the cement brick machine is easy to wear and has the characteristics of a large operation
We know that the biggest feature of the cement brick machine is that it can change molds. The cement brick machine can reasonably and effectively manufacture cement bricks according to the needs of customers, which fully expands the application and sales scope of customers. Of course, this prerequisite is that only the equipment and molds are selected properly and can be maintained at the same time.
What we are talking about is the problem of cement brick molding machine, which is also an important component of a complete set of equipment and is related to work efficiency and quality. You also need to be very careful when choosing a cement brick machine. Not only must you choose the cement brick mold that suits your specific needs, but you must also check the quality of the mold effectively and efficiently. The cement brick mold is one of the factors that directly affect the quality of cement bricks. A good mold shell can ensure that the output of the cement brick source is continuous and not easy to damage. The cement brick machine requires us to reasonably and effectively ensure the interests of customers because everyone knows that in today's cement brick market, shutdown or interruption of Open manufacturing represents continuous harm, and the quality status of hollow brick molds that do not meet this standard seriously harms the interests of customers
It is recommended here that when selecting equipment or supporting facilities such as mold shells, you must pay attention to these aspects and fully consider all aspects of factors before you can select a suitable cement brick machine.
领英推荐
To obtain the greatest benefits from good engineering material equipment, we need to do a lot of work. Of course, this may sound a bit complicated. In fact, we only need to choose the appropriate cement brick machine, and we need to choose carefully. and purchase.
The key point is environmental management. The raw materials used by the clay brick machine are mined on the spot, which causes great damage to the environment. The cement brick machine has certain advantages in environmental management. Secondly, the cost and cost are lower and cheaper than clay bricks.
After a period of use, the mechanical equipment will show zero system damage, and daily maintenance, repair and cleaning are indispensable. When the cement brick machine consumes time, it relies on vibration and pressure, so the supporting mold of the cement brick machine is easy to wear. When the mold shell is consumed again, it is necessary to terminate long-term direct contact with various solid waste aggregates.
For this, you need to bear strong pressure
For this reason, in order to maintain the efficiency and service life of the cement brick machine, maintenance, maintenance, and cleaning should be done well when using the cement brick machine, and specific standard daily maintenance rules should be formulated. Excessive temperature of the vibrator motor will affect the abnormal operation of the motor, thereby affecting the consumption efficiency of the equipment. There are many factors that can cause the motor temperature to be too high. The mold shell is the core part of the non-burning brick machine. Under long-term and high-frequency use, wear of the mold core and bushings will inevitably occur. This situation usually occurs after the mold has been used hundreds of thousands of times. If a small number of local customers are affected by improper operation, to mold shell. Mold shell wear needs to be stopped by adjusting the mold shell gap with a tool grinder.
In order to reduce the wear of the mold shell of the brick machine, it is necessary to regularly feed parts such as the mold shell. The mold shell is the core of the contact between the whole machine and the original data. This type of local feature is water and concrete. If it cannot be terminated well, The result of the true connection is that the mold core condition is formed and the lining space is too large, which affects the brick manufacturing quality.