March '23

Hardware

I3C Level Translator

德州仪器 TCA39416 I3C Translator is a 2-bit bidirectional MIPI I3C v1.1.1, I2C, SMBus, and SPI voltage-level translator with an Output Enable (OE) input and accelerator. This translator is a directionless voltage-level translator specifically designed for translating logic voltage levels. The TCA39416 translator is compatible with 12.5MHz I3C speeds and supports high-speed SPI applications with two devices. This device operates from 0.72V to 1.98V on both the A-side and B-side, with VCCA must be less than VCCB for proper operation. Features include internal 10kΩ pull-up resistors on Ax and Bx that act as high-keeper.

AD & SD Miniature Thermal Cutoff Devices

Bourns, Inc. AD and SD Miniature Thermal Cutoff (TCO) devices are resettable mini-breaker devices offering advanced overtemperature protection technologies. These TCO devices use a highly-rated corrosion-resistant bimetal mechanism for better endurance in humid environments. The SD and AD TCO devices are either non-automatically resettable (self-hold function) or automatically resettable (non-self-hold function).

Single Pair Ethernet Click Board

The Single Pair Ethernet Click Board? is the compact add-on board you need to create a generic interface to many third-party processors in 10BASE-T1S applications. With the LAN8651, a low-power single-port 10BASE-T1S MAC-PHY Ethernet Controller with SPI from Microchip, you can now access 10BASE-T1S networks with ease.

Combining a Media Access Controller (MAC) and an Ethernet PHY, the LAN8651 enables low-cost MCUs to access 10BASE-T1S networks, allowing for the creation of both multidrop and point-to-point network topologies. With the simultaneous transfer of both Ethernet transmit and receive packets between the station controller and the LAN8651 performed over a high-speed Serial Peripheral Interface (SPI), according to the OPEN Alliance 10BASE-T1x MAC-PHY Serial Interface specification, you can be sure that data transfer is both fast and reliable.

PLN Planar Transformers

Bourns, Inc. PLN Planar Transformers are designed for Power over Ethernet (PoE) applications from 48W to 70W that require a low profile and high power density. Bourns PLN Planar Transformers are forward converter transformers operating at a switching frequency of 250kHz with low leakage inductance from 0.xn--29h-yyc to 0.xn--6h-99b. The available output voltages are 5V and 12V with an output current from 4A to 14A, which can withstand hi-pot at 1750VDC.?

Premo-Flex FPC 0.5mm Jumper Cables

莫仕公司 Premo-Flex FPC 0.5mm One-Touch LVDS Jumper Cables feature latching notches and a 100Ω controlled impedance that delivers a durable and flexible connection solution. The locking notches provide excellent retention in high-shock and high-vibration environments and boast up to five times the retention force of straight termination cables. Additionally, these jumper cables offer multiple standard circuit counts that enable added design flexibility with options ranging from 10 to 80 circuits.

CeraCharge - Rechargeable solid-state SMD battery

TDK Electronics Life today would be unimaginable without batteries. We depend on accumulators that are not only based on a variety of technologies but also offer a wide range of capacities.

In all its facets, the Internet of Things will require in the future billions of special power supplies tailored to the requirements of new ultra-low-power semiconductors and sensors.

RF differential amplifier reference design

德州仪器 TRF0206EVM-CVAL Evaluation Module is intended to evaluate the TRF0206-SP amplifier. The TRF0206-SP is a single-ended input to differential output, radiation-hardened amplifier encased in a 6.00mm2 × 6.10mm2, 12-pin LCC-FC package. The TRF0206EVM-CVAL is designed to drive a high-speed differential input analog-to-digital converter without using a passive balun.

The TI TRF0206EVM-CVAL Evaluation Module is set up for 50Ω single-ended input matching, while the TRF0206-SP amplifier has a low output impedance. The board offers ac-coupling capacitors at the input and output. The TRF0206EVM-CVAL is ready to connect to a +3.3V power supply, signal source, and test instruments for the measurements.

KiCAD

7.0.1 Release

The KiCad project is proud to announce the first series 7 bug fix release. The 7.0.1 stable version contains critical bug fixes and other minor improvements since the previous release.

A list of all of the fixed issues since the 7.0.0 release can be found on the KiCad 7.0.1 milestone page. This release contains several critical bug fixes so please consider upgrading as soon as possible.

Version 7.0.1 is made from the 7.0 branch with some cherry-picked changes from the development branch.

Packages for Windows, macOS, and Linux are available or will be in the very near future. See the KiCad download page for guidance.

Hardware Design Templates

1553B hand-held device size D

?????? ?? ???????? ???????? ?????????????? ???? ?? ?????????? ???? ??????????????????

The new addition to the #hardwaretemplates presented by Beny-devices will be the beautiful 1553B by Hammond Manufacturing Co. Ltd.

?? The enclosure is dedicated to Hand-held devices but not only. You would understand just after you grab that case by your hand.

?? Its soft-sided rubber sides are so pleasant to touch.?

The enclosure is 117 mm x 79 mm x 24 mm) or 4.62 in x 3.11 in x 0.95 in if you prefer strange units ??

The new Hammond Manufacturing 1553B will be here for you soon. Stay tuned.?

Its colour options are combinations of ??????????.

#nowastedesign, just verified and proven Hardware Design Templates.

FMC HPC 4x40

?????? ???????? ?????????????????? ??????

What you will get:

The Hardware Design Template package for the most straightforward schematic design and PCB layout of an Industrial FPGA Mezzanine board with an HPC 10x40 pin connector.

?????? ???????????????? ???????????? ???????????????? ?????????????? ????????????????:

?Design data of the verified PCB template.

?A design library of all used symbols.

?A design library of all used footprints.

?Clean and easy-to-order BOM of all components.

?????? ???????????????? ???????????? ???????????????? ????????????????:

?FPGA Mezzanine board single size

?HPC 10x40 pin connector

The brand new FPGA Mezannine HPC Hardware Design Template is waiting for you. #nowastedesign, just verified and proven Hardware Design Templates.

Unique 1-to-1 session KiCAD training

?????? ?????? ???????? ?????? ?????? ???????? ???????? ???? ???????#kicad????? ?????? ???????? ????????

1?? You ???? ???????????? want to pay ?????????????????????? ??Eagle, ??Altium Designer or ??OrCAD Allegro subscriptions.

2?? You hesitate with migration to KiCAD because you do not feel confident using it yet.

3?? ?????? ???????? ?????? ?????? ???????? ???? ???? ???????? ?????? ???????????????????? ?????? ???????????????#?????????????????????????? ?????? ??????.

????????.

??????.

??????.

?? ?????? ?????????????? ???????? than a prefabricated Udemy course. For everyone and for no one at the same time.

?? ???????? ???? ?? ?????????????? ?????? ???????? ???????? ???????? ??????.

?? KiCAD v6 or v7

?? Six years of my experience in a package bespoke for you.

?? ???????? ???????????? + ???? ???????????? = ???????? ?????? ??

?? ?????????????? ???? ???? ?? ???? ?? ???? ???????????????? ???????????? ?????????? ???????????#??????????????????? ?????????????? ?? ???????????????? ??????????. ??

Coffee?

Do you like my work or this newsletter? You can?buy me a virtual coffee?or send me a direct message here on LinkedIn.