Maple Machine Test

Why would these test necessary while machine producing :

These two test could set up and use quickly and easily, reducing waiting time.

1. Diagnostic software automatically interprets results and diagnostic errors, it helps to greatly shorten the production time of components.
2. Preventive maintenance work could reduce the overall waste rate by more than 30%.
3. Helpful to ensure consistent component compliance it will improve overall production efficiency.

Let’s see what we use brand and spec for machine test !!!

=> RENISHAW

Laser test => Spec: XL-80=>Common standard: VDI 3441-1977

Ball bar test => Spec:QC-20=>Common standard: ASME B5.54(2005)

How many times does Maple do laser and ball bar test?

Laser test : 2 times

First time ,when machine body is set up ,

Maple does laser test with running machine.

Second time, when machine is equipped with NC controller ,

Maple would do laser test again.

=>In order to provide high-performance measurement and calibration.

Ball bar test : 1 time

When machine is equipped with NC controller ,Maple would do ball bar test.

=>In order to diagnose spindle cutting diagnosing fault errors.