High Quality Manual Hand Corrugated Box Stitching Machine

Features:

● There are mainly nail head, bracket, drive motor, drive clutch, body and foot switch.

● The Drive motor is generally 0.5 kilowatts, With single or double-stage tripod transmission power, and the motor has only one speed ratio.

● The Motor operates at work, but when the pedal switch is not stepped on, transmission the clutch are not fixed, and the nails are not nailed.

● This Machine-Manual Stitching machine can reduce the labor intensity of employees, greatly improve the staff's work efficiency and enthusiasm.

Maintenance Of Manual carton Box Stitching Machine

1. ?Lubricate the nail head punch once a day, ?disassemble the nail head every 30 days, clean and refuel;

2. The lower nail head has fallen down and accumulated in the punch due to the electroplating chips of the nail line,

so it must be cleaned frequently and the nail head must be disassembled;

?3.Clean and refuel and then reassemble;

4. The left and right baffles of the paper feed belt bolt groove shaft are three Gears ?should be greased once every

30 days;

5. No oil or water can enter the clutch or brake;

6. The servo motor must be kept clean to avoid dust coverage, and the cooling dust filter of the servo motor driver must be cleaned frequently;

7. The electrical control box must be kept clean Clean to avoid short circuit caused by dust coverage; 8. The inner and outer wire feed wheel shafts must be kept flexible and lubricated with butter;

9. The nail head fixed shaft and the left and right baffle fixed ?shafts must be cleaned and lubricated with engine oil when moving;

10. Upper, The lower nail head drive shaft, bolt groove shaft, and drive screw are lubricated with oil.

Send your inquiry directly to us

?ANNA TANG

?Email: [email protected]

?Whatsapp/wachat：008613363699514