Maintenance of Wood Plastic Flooring -- Rollmax Wendy

General Considerations

?Ensure a d equate ventilation under and between decking boards.

?Improve drainage or grade soil to eliminate standing water under decks.

?Direct downspouts, downspout extensions and splash guards away from decks.

? Position dryer vents away from decks. Maintain a deck that is dry and clean.

? Clean your deck twice a year after the last of the major pollen events.

??Use extreme caution with pressure washers and use at pressures less than 1,500 psi at 12'' above deck surface.

? Keep debris out of gaps between the decking boards so rain showers can remove pollen and organic debris between cleanings.

?Minimize the use of wet mulch up against the deck structure.

? Place a vinyl-backed splatter guard mat underneath your grill.

? While normal day to day activities will not scratch your ROLLMAX decking, like timber or any other surface, excessive activities will damage the surface. Skateboarding, dragging heavy furniture, dancing in stiletto heels are some of the activities which may cause the capping to scratch, abrade or chip.

? We recommend fixing pads under your outdoor chairs to stop the constant dragging wearing away the capping over time. Unlike timber decking, composite decking cannot be sanded back.

? Never use a METAL shovel to remove ice or snow from a ROLLMAX deck.

??Use mild detergents for cleaning – avoid strong products like bleach, CLR, sugar soap, etc.

?? If building or renovations are taking place, cover the deck to avoid concrete or gyprock dust getting on the deck. Mineral deposits left over from construction can mix with water and evaporate leaving deposits behind which creates a white haze on the deck’s surface. We recommend leaving the laying of your new deck until after all other works have been completed.

?? Oil / Grease / Food and well-known staining items like red wine must be removed from the surface within a reasonable amount of time to maintain the 15 - Year Limited Stain Warranty.

How to solve the following problems when your wood plastic deck has the following problems:

1.???? Dirt and debris

Surface debris should be sprayed off with a hose. Use warm soapy water and a soft non-metal scrub brush to remove dirt and debris within the embossing pattern. Scrubbing in the direction of the grain is best.

2.???? Tannins

Tannins can form when organic material gets stuck within the gaps of the deck and water starts to pool under it. Therefore, it is best to remove the debris within gaps with a garden hose, spatula, or soft broom. Keeping the gaps clean will reduce the chances of tannins from forming leaving your deck cleaner.

3.???? Ice and snow

Use calcium chloride or rock salt to melt the snow and ice. Buildup of calcium chloride and rock salt may occur leaving a white residue, which can be easily removed with warm soapy water and a soft non-metal scrub brush.

4.???? Oil/grease/food

All oil / grease / food spills must be removed promptly. To clean use warm soapy water and a soft non-metal scrub brush. Grease and oil may require an all-purpose cleaner if warm soapy water and a soft non-metal scrub brush do not work. Be sure to check with manufacturers on which cleaners are appropriate to use on your de

5.???? Mould and Mildew

Mould and mildew occur periodically in everyday environments. Therefore, surface mould and mildew can appear on the deck if decaying organic material such as, but are not limited to, wood, leaf decay, and pollen are present along with elevated temperatures, air, and water. There is no way to completely eliminate mould and mildew, therefore, we can only minimize the occurrence by removing these decaying organic materials as quickly as possible. If mould and mildew are present use warm soapy water and a soft non-metal scrub brush to clean.

6.???? Irregular heat sources/fire

Composite decking has the tendency to retain heat whenever presented directly or indirectly to it. Irregular heat sources, such as, but not limited to, fire pits, fire places, and barbecue grills, and fire may damage the surface of STRC WPC decking. Proper caution should be taken with irregular heat sources and fire to ensure no damage occurs to the deck.

7.???? Masonry/concrete/gyprock construction works

During masonry construction or any building and renovations involving concrete and gyprock, the deck must be covered at all times, preferably with a sheet of tarp or construction grade plastic film. Mineral deposits left over from construction can mix with water and evaporate leaving deposits behind which creates a white haze on the deck’s surface. Gyprock and Concrete contains substances (i.e. lime) that will damage your deck. To prevent these problems, ensure that masonry/cement construction is set properly before ever installing the decking material. If mineral deposits are left on the deck’s surface, regular maintenance is required in order to maintain the original look of the deck.

How to clean your decking?

Firstly, use a broom to remove any excess leaves and debris from the surface. You should also use a hard bristle brush or scraper to remove any accumulations of moss, leaves or algae. This will leave the surface clear to begin cleaning.

Prepare a bucket of hot soapy water or grab a bottle of composite decking cleaner.

Apply the hot soapy water or cleaner to the decking. Once applied use a hard-bristle brush to scrub the surface of the decking. Any surface debris will start to lift off.

Leave the hot soapy water or cleaning product on the surface to stand for several minutes before rinsing the boards. Ensure all cleaning fluid, soap and debris have been successfully removed from the boards before leaving to dry.

Materials/Cleaners

1. Towel

2. Bucket

3. Water

4. Steel Wool/ Rigid Brush or Broom

5. Dishwashing Gloves

Note: Always wear gloves when dealing with cleaners.

For more clues and instruction re wood plastic composite decking installation, specification choose, project matching, maintenance, as well as new proposal, welcome contact us via:

www.rollmaxwpc.com

whatsapp wendy wang +86 155 0532 6508

mailing to [email protected].