The Magnificent Seven
1. Air intake louvre dirty
By fitting a RABScreen directly to the weather louvre you not only keep the louvre clean but also PreVent? contamination getting through to the ductwork. The RABScreen is easy to wash or brush down when passing.
2. Vermin mesh dirty
By using a RABScreen instead of vermin mesh the airflow will improve and the arrestance level will increase. It’s a win, win for all vermin mesh replacements. And we even fitted the AJM Drop In frame system to make life even easier.
3. Cooling coil clogged
So easy to protect with a RABScreen manufactured to suit your chiller. We have protected these brands thus far – Stulz, Carrier, Climaveneta, Aggreko, Trane, Liebert, Daikin, York, Airedale, Lennox, Dunham Bush, McQuay and TCI. Cleaning a RABScreen is much easier than cleaning a cooling coil.
4. Increased demand for disposable filter changes
Filter changes are the necessary evil of HVAC PPM’s. By fitting a RABScreen as your pre-filter you will extend the life of your disposable bags and panels by more than 60%. You will maintain airflow for longer and reduce the pressure differential whilst saving money on filter changes. Another winner from RABScreen .
5. Energy use increasing
When you fit a RABScreen to your chiller or AHU intakes you will reduce the contaminants blocking the airflow and ease the pressure on your fans. Keeping them clean with a RABScreen can save up to 30% of the total energy draw. Cost effective supply, installation and R.O.I.
6. Chemical use increasing
Cooling towers get bad press and yet they are the most inspected and tested of all HVAC equipment. Fitting a RABScreen reduces the contamination and therefore helps to eliminate the nutrient source for bacteriological growth. This also lowers the use of chemicals and keeps your tower safe.
7. Construction work nearby
One of the main reasons for HVAC failure is caused by the increased airborne dust from local construction sites. Every piece of HVAC equipment should be protected with a RABScreen to maintain efficiency and reduce failures.