loading cell sensor glue dispensing machine ab epoxy potting machine AB part pu dosing and mixing machine for weight cell sensor Weight Sensor

Whatsapp+86 134 2516 4065 loading cell sensor glue dispensing machine ab epoxy potting machine AB part pu dosing and mixing machine for weight cell sensor?Load?Cell Weight Sensor force sensor force transducer?

2 components dispensing machine vacuum pump for dispenser glue machine meter mix dispenser

Our AB Potting machine helps AB compounds offer superior protection for electronic circuits industry

Our Universal equipment is widely works for epoxies, silicones and polyurethane compounds , we configure different functions for the features of different compound to meet up with the production purposes .

OUR machine with tank stirring vacuum degas functions ,which can help compounds to remove air bubble easily and arrived the good potting status .

Removing air bubbles is very important.Vacuum degassing remains a critical processing step. The best technique for vacuum degassing is referred to as "bumping degas" which is alternately pulling and relaxing a vacuum in 30- to 60-second cycles.

Machine Congigurations? Introduction : 1. Working Mode: controlled by PLC module and MCGS touch screen.

2.High precision valve: high speed, glue off clean, no glue drawing, no dropping.?

3. Core metering pump specially design for different material from low to high viscosities.?

4. Mix glue A & B more evenly; no more or no less for agent B.

Working principle : Compound materials A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine for metering A and B resin by setting ratio, draining out material individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.

Tank system technology:

1. Stainless panel vacuum pressure tank which can bear negative pressure of inner tank .?

2. Tank with motor stirrer that prevent the glue from sediment and keep the potting material in constant temperature.

3 Tank with top/ high /low liquid sensors that ensure alarm warning when liquid higher or lower the setting level .

4 Tank with vacuum degas (degas time can be set through touch screen), so the material can be re-feeding through vacuum negative pressure .

5 Tank with pressure releasing ball valve ; the bottom of tank reserved back-flow connector and river closure ball valve.

6 Tank with heater which can preheat materials to assure good flowability .

7 Tank with artificial feeding mouth that can be added glue appropriately by hand .?

8 Tank with silica-dryer which can prevent material especially PU from crystallization . ?Pump technology

1. Our? pumps work by durable motors.?

2.The biggest flow volume :24g/s,Repetition accuracy:0.2g.?

3.Also Suitable for high viscosity glue: 50cps~35000cps.?

4. Suitable for big flow dispensing or slight flow dispensing.?

5. Suitable for frequent start and stop dispensing.?

6. Anti-wear, Anti-corrosion, super long life time.

Valve technology

This valve is designed for any 2K (two-part) dispensing, encapsulation or potting applications. Controlled by compressed air, the balanced valve core design has integrated valve suck-back to eliminate unwanted material dripping and reduces product waste. Suitable for epoxy resins, silicone resins, acrylics, polyurethanes, and thermally conductive materials. PLC operation Controlling System 1 Dispensing volume is controlled by the speed of pump's motors ; Glue speed adjustable within the speed range .?

2 Machine with detecting function that detect the speed and running time of pumps to ensure the ratio reliability.?

3 Adjustable gluing-out volume make sure glue A/B dispense out at the same time from glue valve to get better glue mixing effect .?

?4 Machine with gel resistance calculator , which prevent the mixture curing inside .?

5 You can set single gluing-out and steady gluing-out function to meet up with your different process requirement .?

6 Whole machine system and function is controlled by Panasonic PLC and MGCS touch screen .?

7 Reserved PLC communication interface, which easy connecting with outside device .?

8 Equipped with a safety lock to prevent staff from wrong operation .

ITEM

Parameter

Mixing ratio

1:1--10:1 adjustable

Working range

Can be customized?

Displacement speed

300mm/s(speed)

Out-glue speed

1-12g/s per single pump

Accuracy

±2%(output volume)±2%(mixing)

tolerance

≤0.2mm

Flow control

Digital input

Program memory

99pcs-999pcs

Motion trail

Dot , line ,curve ,circle

Automatic controlling system

Touch screen (to achieve program programming, modification, storage and so on

Out-glue control system

AB glue back suction valve, achieve AB glue independent operation

Programmatically

Tech programming/or computer systems (Micro software Windows 7,Windows10 optional)

Mixing method

dynamic mixing

Power supply

220V/50Hz/1500W without heating

Air source

0.5-0.8Mpa

Viscosity range

50-20000cps

A tank

10L 25L 40L stainless tank(optional)

B tank

10L 25L 40L stainless tank(optional)

Others

AB tank ,A pump,AB pipeline heating function

Two component dispensing potting dosing system ,electronic potting and casting system ;

?

Epoxy resin electronic products machinery vacuum casting machine pu glue machine automatic ab glue machine adhesive machines

Our Automation specialize in different types of potting and dispensing system. No matter what your resin application requirements look like:?we can do most of them in our fully equipped lab. We can handle 1- and 2-component polyurethanes, epoxies, acrylics, silicones, temperature, humidity and UV curing materials.?They can be from low- to high-viscosity, filled or unfilled and even high abrasive for thermal conductivity.

?

More machine types and designs to suits for different application processes requirements

Sara DongSales Managerm:0086 13425164065(whatsapp) Wechat : xd5358840