LC full function DALI CU 04-EN-4

This CU has pretty integral features!

1. It can changeover among 0－10V dimming signal/digital dimming commands?and DALI broadcast command.

2. Measuring power and lighting data.

3. It has 2 CHs 0-10V dimming signals or digital dimming commands?buffered output.

4. 0-10V output interfaces are designed to sink or source current, up to 25mA.

5. It is compatible with DALI 2-wire sensor (preferential) and ESI sensor.

6. Digital command or 0-10V signal dimming method can be selected?via ESI(Enlighted sensor interface).

7. It has extension connection to DiiA/Zhaga DT49, DT50, DT51, DT52.

8. It allows to select the desired device type via operating mode;? ?

0x00: IEC 62386-102 standard mode.? ?

0x80: manufacturer specific mode, DT6,DT8 Tc,DT17? ? supported (default).

9. This CU translates DALI dimming commands to 2 CHs analog 0-10V output? ? (CHA: Intensity, CHB: CCT).

10. It has AC load relay, can be switched off when dimming off by ESI.

11. Zero-crossing switching function for AC load relay.

12. This CU with DC signal relay, will short-circuit DALI interface and physically?disconnect 0-10V output interfaces in case of power loss.

13. We put a DALI PSU(bus power supply) in this CU to save wire connection. 15V, 55mA (programable to 200mA),

14. AC output: 8A Max., 1385VA Max.

15. Over current protection when load connects to Switched, and the?failure information is recorded in NVM.

16. IP65 protection rating. Plenum rated, Line voltage: 100~347Vac, Product size: 95.3*60.4*26mm

This is standard functions, if don't need part function or want to change parts, we can tailer for you.