Kiln cart cleaner in the production line of clay brick making

Automatic vacuum cleaner for kiln car cleaning----BBT, Designer&Supplier&manufacturer for clay brick making machine and production line

Automatic vacuum cleaner for kiln car cleaning

① ?Automatic working

② ?Simple structure

③ ?High working efficiency

④ ?Easy maintaining?

⑤ ?Using for kiln cart cleaning in the?production line of clay brick making

⑥ Can be custom building according to the size of the kiln cart

1. Why need the automatic vacuum cleaner for kiln car cleaning

In?the firing process of clay brick and tile, dust?will be produced from the brick plants,

Because the internal combustion?for brick firing?is insufficient, coal and combustion aids are added?into the raw material to help fire, and when firing, dust will be floated into the air. When the kiln carts?leave?from the kiln with fired brick, dust particles will be leave together.

After fired brick unloading from kiln cart, large particles on surface of kiln cart can be cleaned by manual, but dust inside the kiln cart cannot?be cleaned completely, which will damage the kiln cart in the future.

The vacuum cleaner is designed by BBT for cleaning of kiln cart thoroughly, with environmental protection?and cost saving.

2. Structure

The automatic vacuum cleaner adopts a bridge-frame?as the designing?layout,?

① whole structure?are divided into 5 parts:

a. The supporting frame of the whole machine,

b. The rolling brush?cleaning part,

c. The lifting dust suction part,

d. The walking moving part,

e. The electrical controlling?part.

② ?Applicable kiln car width: ?can be adjustable?accordingly

③ ?Speed of mobile trolley:??0.12m/s

④?Reasonable structure, stable operation, low failure rate, high degree of automation and easy maintenance.

④ ?PLC automatic controlling,?dust collection particles equal or below 20mm?can be collected.

3. Working process

① After the kiln cart stopping at the cleaning location, the elevating dust suction?parts expands to the required working height,?at the same time, the suction parts?and the rolling brush?part?are starting to work.?The dust on the surface of the kiln cart and inside the gap?will be absorbed during working;

② After the moving part?walks?to the?end of the?kiln car,?cleaning for the first kiln cart will be finished,?it will stop work, and then the lifting dust suction part will rise,?which moved in parallel together with the?rolling brusher?to the next location for kiln cart cleaning, the vacuum?part?is?going to extend to the required height, and circle to the next location.?

① ?The dust?is in stock in the ash hopper and discharged to the box through the electric feeder on?regular.

If any interested pls advise

XI’AN BBT CLAY TECHNOLOGIES CO., LTD.

Contact???????: Ms. Noda Pan

Email address??: [email protected]

M/WA ???????: +86 177 9142 2086