This is not just a button

AC Power failure longer than expected? Battery completely discharged? Our DC-UPS can be restarted by pressing the , replacing the discharged batteries with a new one, and AC mains failure still present.?

1. AC Power failure.

2. DC-UPS continues to power backup through the battery.

3. AC Power failure took longer than expected, and the battery completely discharged.

4. Replace the battery with a new one.

5. Push the Battery Start button and DC-UPS power back up again even if AC mains failure is still present

Time is on by our side

Adeslystem units comply with the norm requirements that an overload of 50% over the nominal current. Power Boost is one of the Adelsystem Power Supply features. It allows the use of a smaller size unit to power demanding loads such as motors, solenoid valves, lamps, and other loads with transient overload behavior, which would otherwise require an oversized power supply.

Wherever you want it to be

The second generation of ultra-compact Battery Holders, for VRLA and LI-Ion Batteries, is a unique product for mounting DIN Rail and Wall mount for all models; the 12 Ah is only for wall mounting. Steel containers, high battery protection, and a minimum encumbrance on the DIN Rail combine the batteries overlapped. The ADEL System DC UPS constantly monitors them. Available in 24V.

You can define 18 parameters

The advanced configuration is the core of the Controller Panel DPY351. You can define:

1. Battery Type
2. Maximum charge current
3. Bulk Voltage
4. Maximum bulk duration timer
5. Minimum bulk duration timer
6. Absorption Voltage?
7. Max Absorption duration timer
8. Min Absorption duration timer?
9. Return current to float
10. Float to bulk return voltage?
11. Float to bulk return delay
12. Max Battery temperature
13. Min Battery Temperature
14. Low Battery threshold
15. Deep discharge prevention
16. Force boost charge
17. Float to bulk return delay
18. Battery life tests enable

https://www.adelsystem.com/en/