Jinpeng Group carries out counterbalanced forklift inspection work

#erickshaw #tuktuk #toto #3WHEELER #motorcycle #tricycle #ev #electricvehicle #emobility #oemfactory #Electricity #Automobiles #Jinpeng

of Jinpeng Group's Jinzhu Forklift , from December 11th to 13th, Jinzhu Electromechanical and Beijing Vehicle Inspection Engineering Research Institute carried out type testing and inspection of special equipment battery counterbalanced forklifts

.

Forklift is an industrial vehicle used for transporting and stacking goods. It is widely used in warehouses, industrial production, logistics centers and other fields. In order to ensure the safety, stability and reliability of forklifts, type tests must be conducted during the design, manufacturing, use and maintenance processes to evaluate whether the performance and safety of forklifts comply with relevant standards and regulations.

After close cooperation between the R&D department and the production department, the 3.5-ton battery forklift has undergone type testing by the Beijing Vehicle Inspection Engineering Research Institute. It has gone through layers of procedures, including blanking, machining, welding, spraying, assembly, quality inspection and testing. , started testing on December 11th. The inspectors from the Beijing Research Institute first tested the technical parameters of the forklift by measuring the rated lifting capacity, full length, full width, lifting height, front overhang and rear overhang

.

Among the type tests, the braking performance test, stability performance test, overload experimental test, and impact drop test are the most important.

There are dangers and challenges during the test. All testers have been trained. Cai Jintong, head of the R&D department, took the lead in the braking performance test. The 3.5-ton counterbalanced forklift perfectly met the requirements when the tension sensor reached 1200N. During the stability experiment, Zhang Peng from the R&D Department operated a forklift to cooperate with the test. The angle of the tilted platform was greater than 15°, and it could still be safely parked on the experimental platform. In the overload experimental test, the forklift was overloaded with a rated lifting capacity of 1.33 times. The structural components, hydraulic system and other aspects of the forklift were able to operate normally without excessive deformation, rupture and oil leakage.

The last item is the impact drop test of the roof guard, which is also the most important one. Whether the strength of the roof guard can protect the safety of the driver plays a vital role. The impact drop test of the roof guard is to determine the impact of large loads. The deformation of the top guard when the test load is 1360kg, rises to the top guard and drops vertically 1.6 meters to hit the top guard. There are no cracks or structural separation in the structure of the overhead guard and its accessories

There were also some problems in the type test that brought difficulties to the test, but through everyone's efforts, they were overcome one by one. Through this test, we not only deepened our understanding of relevant knowledge, but also improved our practical ability and teamwork spirit. In the future, we will continue to improve product research and development to bring a better future to Jinpeng Group's Jinzhu forklifts.