[Fixed] iPhone Keeps Showing The Apple Logo and Turning off

My iPhone won’t turn on and it just goes to the Apple logo and turns back off. It’s the third phone that has done this to me. Why? —Quora

If you're on this page, you’re likely dealing with the issue of your iPhone and searching my iPhone keeps showing the apple logo and turning off. This can be stressful and can happen to any iPhone model. In this article, we'll explain how to fix the problem with clear, detailed steps. Keep reading to learn more.

Why Does My iPhone Keeps Showing the Apple Logo and Turning Off?

There are several reasons why does my iPhone keep rebooting. Let’s break down some common causes:

• If you’ve jailbroken your iPhone, it might cause system instability, leading to this issue.
• Your iPhone might not have enough storage space to run properly, causing it to get stuck on the Apple logo.
• After updating to the latest iOS, like iOS 17.6 or iOS 18 beta, your iPhone might encounter software glitches.
• Restoring your iPhone backup incorrectly using iTunes can also cause this problem.
• Water damage or physical damage to the battery or other hardware components can make your iPhone get stuck on the Apple logo and turn off.

How to Fix iPhone Keeps Showing Apple Logo and Turning Off

Here's a detailed table comparing the different methods to fix my iPhone keeps showing the apple logo and turning off. The comparison is based on important factors: effectiveness, time consumption, and the risk of data loss.??????

Way 1: Force Restart your iPhone

A force restart, or hard reboot, is a quick and effective way to resolve many common iPhone issues, including when "my iPhone keeps showing the Apple logo and turning off."This can clear out temporary issues that might cause your iPhone to be stuck on the Apple logo.

Here’s how to force restart your iPhone, to fix iPhone blinking Apple logo:

For iPhone 8 and Later:

Step 1: Press and quickly release the Volume Up button.

Step 2: Press and quickly release the Volume Down button.

Step 3: Press and hold the Side button until the Apple logo appears.

For iPhone 7:

Step 1: Press and hold both the Volume Down button and the Sleep/Wake button simultaneously.

Step 2: Continue holding until the Apple logo appears.

For iPhone 6s and Earlier:

Step 1: Press and hold both the Sleep/Wake button and the Step 2: Home button simultaneously.

Step 3: Keep holding until the Apple logo appears.

Way 2: Fix iPhone Keeps Showing Apple Logo and Turning Off Via ReiBoot Repair Tool [Easiest]

If your iPhone won't turn on/stuck on Apple logo, using a specialized iOS repair tool might be the solution. Tenorshare ReiBoot is highly recommended for addressing the issue of an iPhone that is stuck on the Apple logo. This powerful, user-friendly tool is designed to fix various iPhone problems, including those caused by water damage. With Tenorshare ReiBoot, you can restore your iPhone to working condition quickly and easily, without risking data loss or incurring expensive repair costs.?

Key Features of Tenorshare ReiBoot:

One-Click Recovery Mode: Easily enter or exit recovery mode with just one click.

Broad Fix Capabilities: Resolve over 150 iOS, iPadOS, and tvOS issues, including blank screens, Apple logo freezes, and non-responsive screens.

Secure iOS Updates: Update to the latest iOS 17 safely.

Reset Functions: Remove iTunes, Finder, and passcode to reset iPhone, iPad, and iPod touch.

Fix iTunes Errors: Easily resolve iPhone/iTunes errors such as 4013/1110.

How to Fix Your iPhone with Tenorshare ReiBoot:

Step 1: Connect your iPhone to your computer and open Tenorshare ReiBoot on your PC or Mac. Click "Start Repair" on the main screen.

Step 2: Even if your iPhone's screen is black or it can't enter a passcode, the software should still recognize your device. Select "Standard Repair" to proceed.

Step 3: Download the latest compatible firmware needed for recovery. Click the “Download” button to get it.

Step 4: Once the firmware download is complete, click “Start Standard Repair” to begin the repair process.

Step 5: Do not disconnect your iPhone during the repair. After the process is finished, your device will restart and should function normally.

Video Guide: iPhone blinking Apple logo

Way 3: Charge your iPhone

If your iPhone won’t turn on and only shows the Apple logo before turning off, the issue might be a dead battery. Charging your device could fix this problem.

Here are the steps to fix iPhone flashing apple logo on and off :

Step 1: Plug your iPhone into a power outlet using the charging cable and an Apple USB power adapter.

Step 2: Allow your iPhone to charge for at least 10 minutes.

Step 3: After charging, press and hold the Side button until the Apple logo appears.

Step 4: If your iPhone turns on, the issue may be resolved. If it still shows the Apple logo and turns off while charging, move on to the 2nd method.

Way 4: Restore your iPhone Via iTunes

If your iPhone keeps flashing Apple logo when charging, you can try restoring it through iTunes without using any tools. This process erases all content and settings on the iPhone, including any software bugs, and installs the latest iOS version.

Step 1: Make sure that you have the latest version of iTunes installed on your computer. If iTunes is already open, close it.

Step 2: Use a USB cable to connect your iPhone to the computer. Put your iPhone into recovery mode by following the steps for your specific iPhone model.

Step 3: Launch iTunes on your computer. It should automatically detect your iPhone and display a dialog box indicating that your iPhone has a problem and needs to be updated or restored. Select the "Restore" option.

Step 4: In the next dialog box, choose "Restore and Update," then follow the on-screen instructions to restore your iPhone to factory settings. This will erase all data, so make sure you have a backup if needed.

Way 5: Fix iPhone Shows Apple logo Then Turns Off via Recovery mode

You can enter Recovery Mode using? ReiBoot repair tool to fix an iPhone shows Apple logo then shuts off. This tool is compatible with all iPhone models and iOS versions, including the latest iPhone 15 and iOS 18.

How to Use Tenorshare ReiBoot:

Step 1: Download and install Tenorshare ReiBoot on your PC, Mac, or laptop. Click start.

Step 2: Launch the software and click on "Enter Recovery Mode."

Step 3: Once in Recovery Mode, you can use the tool to fix the issue without data loss.

Way 6:? Use DFU Mode (Data Loss)

If trying to fix the iPhone won’t turn on stuck on Apple logo with Recovery Mode doesn’t work, your next option is to use DFU (Device Firmware Update) Mode.

DFU Mode is the most comprehensive restoration method for an iPhone, designed to handle severe software problems that other methods can't fix. However, it’s more advanced and comes with higher risks, so proceed carefully.

Steps of how to fix iPhone flashing Apple logo on and off:

Step 1: Connect your iPhone to your computer and make sure the latest version of iTunes is installed.

Step 2: Enter DFU Mode:

For iPhone 8 or later: Quickly press and release the Volume Up button, followed by the Volume Down button. Press and hold the Side button until the screen turns black, then press and hold both the Side and Volume Down buttons. After 5 seconds, release the Side button while still holding the Volume Down button until iTunes detects your iPhone in recovery mode.

For iPhone 7/7 Plus: Hold down the Side and Volume Down buttons at the same time. After 8 seconds, release the Side button while keeping the Volume Down button pressed.

For iPhone 6s and earlier: Hold both the Home and Top (or Side) buttons together. After 8 seconds, release the Top (or Side) button but keep holding the Home button.

Step 3: Once in DFU Mode, choose to restore your iPhone. The DFU mode allows you to select the iOS version.? This will erase all data and install the latest iOS version.

Way 7: Contact Apple Store

We understand how frustrating it can be when my iPhone keeps turning on and off Apple logo. If the methods above haven't resolved the issue, it might be due to a hardware problem. In this case, it's best to visit a nearby Apple repair store or contact Apple Support for assistance in fixing your iPhone.

The Bottom Line:

If my iPhone keeps showing the Apple logo and turning off, it can be a frustrating experience. This issue is often caused by software glitches or system errors. To fix it easily, consider using Tenoshare ReiBoot. ReiBoot is specifically designed to resolve these issues quickly and get my iPhone back to normal without the need for complex troubleshooting.

Also Read:?

How to Fix iPhone stuck in boot loop

iPhone Screen Black But Still Works in 5 Easy Ways

How to Fix iPhone Flashing Apple Logo in 5 Ways