iPhone 14 Ear Speaker Replacement | 26 Easy-To-Follow Steps

It would be frustrating for you if you couldn’t hear the voice of the person who’s speaking about your project on the other end of the line. The solution in this case is to replace the ear speaker on your device. Knowing the step-by-step guide will save your time and money on costly repairs.

In the ear speaker replacement process, there is the removal or replacement of the ear speaker component in the device. These components work for producing sound and other audio functions.

This article is a complete walk-through on the iPhone 14 ear speaker replacement. Here we discuss the common reasons, precautions before speaker replacement, required tools and materials, steps to replace, and safety measures for future issues. By the end, you’ll be completely aware of how to tackle replacement tasks confidently. So don’t hesitate to follow these 26 easy-to-follow steps and stay connected to your social circle.

Common Reasons For iPhone 14 Ear Speaker Issues:?

There are some common reasons for iPhone 14 ear speaker issues, which are notable:

• Software updates
• Dust and humidity
• Physical and water damage

Precautions Before Speaker Replacement:

To ensure a successful iPhone 14 ear speaker replacement, it’s crucial to take serious precautions. Here are some specific precautions to follow:

• Handle your phone with care. Mishandling may damage its sensitive electronic components.
• Refrain from excessive moisture. It may damage internal components.
• Use high-quality replacement parts for guaranteed top-quality performance on your device.
• Handle the battery as improper replacement may cause overheating and fire.
• Follow the safety instructions given by Apple to save you from any potential danger.

Required Tools and Materials:

After taking precautions to replace the iPhone 14 ear speaker, the next step is to collect the replacement tools. Here is a list of tools you will need.

• Screwdrivers
• Tweezers
• A Suction Cup
• A Spudger
• Isopropyl alcohol
• Adhesive Glue
• Hot Air Gun or Hair Dryer
• A plastic opening tool
• New iPhone 14 Ear Speaker?
• A lint-free piece of cloth

Steps To Replace The iPhone 14 Ear Speaker:

Step 1 Turn Off Your iPhone 14

• Press the power and volume-up buttons for a few seconds.
• Slide the power-off slider button to the right.

Step 2 Remove The Pentalobe Screw

• Take the screwdriver and unscrew the two 6.8 mm Pentalobe screws at the bottom edge.

Step 3 Heat Your iPhone 14

• Take a hot gun or hair dryer and keep it 5 to 7 cm away from your iPhone.
• Then heat all the sides of your iPhone for 90 seconds until the screen is slightly too hot to touch.
• Overheating the phone can damage the internal components of your phone.

Step 4 Fix A Suction Cup Handle

• Take the suction cup and fix it near the bottom edge of the iPhone’s back glass.
• Pull the handle firmly until there is a gap between the iPhone glass and the body frame.

Step 5 Mark Your Plastic Opening Pick And Insert It

• Measure your plastic opening pick at 3 mm with metre rule from the tip and mark it with a permanent marker.

• Just insert the pick 3 mm into your iPhone in the gap between the glass cover and frame.

Step 6 Cut The Bottom Adhesive?

• Slide the opening pick from the lower right to the lower left corner to cut the bottom.

Step 7 Separate The Left Adhesive

• Remove the left adhesive by moving the plastic pick from the lower left to the upper left corner.
• Repeat this movement thrice to remove the left-side adhesive glue.

Step 8 Remove The Upper Edge Adhesive

• Remove the upper adhesive by sliding the pick from the upper left to the upper right corner.

Step 9 Slice The Right-Side Adhesive Glue

• Heat the phone again.
• Slice the right-side adhesive glue by moving the pick from the upper right to the lower right corner.

Step 10 Open The iPhone

• When you slice the adhesive around all the edges, open your phone like the front cover of the book.

Step 11 Unfasten The Battery Connector Cover

• Remove the two 1.3 mm screws from the battery connector and keep them in a safe place.

Step 12 Remove The Battery Connector Cover

• Hold the cover with tweezers and separate it.

Step 13 Disconnect The Battery

• Use the spudger and unclip the press unconnector of the battery.

Step 14 Unscrew The Charging Coil Connector Cover

• Unscrew the 1mm securing the charging coil cover.

Step 15 Remove The Charging Coil Cover

• Hold the charging coil cover carefully and remove it from its recess.

Step 16 Unclip The Charging Coil

• Take the spudger and detach the charging coil connector.

Step 17 Separate The Rear Cover

• Now you can remove the back glass of your iPhone 14.

Step 18 Unscrew The Front Camera Assembly Bracket

• Take a screwdriver and unscrew the two 1.3 mm screws that secure the front camera assembly bracket.

Step 19 Separate The Front Camera Assembly Bracket

• Use a tweezer to separate the front camera assembly bracket and keep it aside.

Step 20 Separate The Sensor Cable And Camera?

• With Spudger, pry up the sensor cable and camera to unclip the press connectors.
• Remove the front-facing camera and sensor assembly with your finger or tweezer.

Step 21 Remove The Antenna

• If your iPhone has an antenna, disconnect it from its socket.
• Use a spudger to pry up the antenna from its recess.
• Finally, remove it with a pair of tweezers.

Step 22 Unclip The Earpiece Speaker

• Now it’s time to disconnect the earpiece speaker.

Step 23 Unscrew The Earpiece Speaker

• Unscrew the five 1.4 mm screws that secure the earpiece speaker.

Step 24 Remove The Earpiece Speaker

• Use a pair of tweezers and hold the earpiece speaker.
• Remove it.

Step 25 Install The New Ear Speaker

• Hold a new ear speaker and install it.
• Connect it and fasten up the screw.

Step 26 Reassemble Your iPhone 14

• Rub an Isopropyl Alcohol cotton bud around the edges of the iPhone frame.
• It’ll soften the old adhesive.
• Use a cotton cloth free of lint and remove the glue from the iPhone 14 frame.
• Reconnect the press connector.
• Fasten all the screws tightly.
• Fit the back glass cover to your iPhone 14 body.

Precaution For Future Ear Speaker Issues:

You can take some precautions for your iPhone 14 ear speaker issues to ensure its overall performance in the future. Read the following:

• Don’t expose your iPhone to excessive humidity and moisture.
• Always handle it with great care to avoid physical damage.
• Clean the speaker grill regularly. It’ll remove the dust that can affect sound quality.

Conclusion:

Through these 26 easy-to-follow steps, you can successfully undergo your iPhone 14 ear speaker replacement. Moreover, you can ensure the safety and security of your data. There are some common reasons for ear speaker issues that should be kept in mind to avoid this inconvenience.?

Before replacing the ear speaker, take some precautions to secure your iPhone 14 from any physical damage. These above given steps provide you with a high-quality replacement. You also have to take precautions to avoid future ear speaker issues.