IoT for kids

IoT for kids

A temperature alarm through Thingspeak and IFTTT

Purpose of this project:

With the Micro:bit board and ESP8266 module connected to the Internet of Things (IoT: Internet of Things), it is possible to track the temperature and humidity measured by the DTH11 sensor in real time.

To create applications for recording sensor data, one can use ThingSpeak which is an API and open source application for the Internet of Things, allowing to store and collect data from connected objects.

Operation Procedure :

  • step 1 : Connect the micro:bit to the Wi-Fi
  • Step 2 : Upload Data to ThingSpeak :?
  • step 3 :Program the Micr:bit board with the blocks to connect to the available WiFi and send the temperature to the ThingSpeak platform.
  • step4 :The second part: Use the IoT kit to male a temperature alarm through Thingspeak and IFTTT.
  • Step?5 :?Thingspeak Setting
  • Step6 : create a React service
  • finally : We can see from the data of Thingspeak channel that the temperature has equal 30m degrees.



For?more information about this project check my article link ?https://iotforkids.blogspot.com/2022/02/lnked.html

** Thank you for following **


Ghaith Al Sabagh

Student, Electronics Engineer

3 年

It will be very nice, if we could make an arabic platform (or to use Youtube or Udemy) to educate such projects in easy and effordable way. Design a very simple low price kit (soldering free), and let the kids play with somerhing more usefull than fortnite!

要查看或添加评论,请登录

Belkacem Roukaya的更多文章

  • Cache Memory Positioning in an MCU

    Cache Memory Positioning in an MCU

    Introduction In a Microcontroller Units (MCUs), cache memory is strategically positioned to optimize performance by…

  • Realization of a drone tracking system

    Realization of a drone tracking system

    What is GPS ? The Global Positioning System (GPS) is a navigation system using satellites, a receiver and algorithms to…

    6 条评论
  • Client-Server chat in C++

    Client-Server chat in C++

    1.Client and server communication The client sends a request, and the server returns a response.

    1 条评论
  • UART

    UART

    1.introduction to UART * Universal a Synchronous Receiver Transmitter * uses only two wires : TX to RX (each direction)…

社区洞察

其他会员也浏览了