An Introduction to The Price of Gypsum Production Line
Gypsum Introduction
Gypsum(CaSO4.2H2O) is a soft sulfate mineral that found in layers of sedimentary rock. sometimes gypsum is in very big colored crystals, and it is generally associated with sulfur deposits and rock salt.
Uses
The most outstanding application of gypsum powder is for plaster and wallboard products. It is widely used in rubber, plastic, fertilizer, pesticide, paint, textile, food, medicine, daily chemical industry, arts and crafts, culture and other uses.
Model Selection of Gypsum Grinding Mill
Guilin Hongcheng Gypsum Milling Equipment: HC Super Large Grinding Mill
[Grinding ring diameter]: 1000-1700mm
[Whole machine power]: 85-362KW
[Numbers of grinding roller]: 3-5
[Production Capacity]: 1-25t / h
[Fineness]: 0.022-0.18mm
[Diverse applications]: For a variety of non-metallic mineral materials with Mohs hardness below 7 and moisture within 6%, including gypsum, diabase, coal gangue, wollastonite, graphite, clay, kaolin, lime, zircon sand, bentonite, manganese ore and etc., that can be used in the power, metallurgy, cement, chemical, non-metallic ore milling, food, medicine and other industries.
[Performance advantages]: accurate fineness control of 80-600 mesh for its short dwell time of the material to be ground, less initial capital investment for its small footprint, ease of operation and maintenance for its automatic system, lower energy consumption for its Optimum utilization of process heat.
Mill Working Principle
Crushing -- Grinding -- Classifying -- Collection
Phase 1: Crushing
After crushed by hammer crusher, the big materials become coarse particle (15mm-50mm)
Phase 2: Grinding
The coarse material are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe.
Phase 3: Classifying
The materials will be driven to the edge of the vertical gypsum mill dial by centrifugal force and fall down into the ring, crushed and ground by roller and become powder. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier.
Phase 4: Collection
The rotating turbo in the powder concentrator will make the unqualified coarse materials return to the mill and reground, while the qualified fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower.
Contact Us for Model Selection
Our experts will provide the customized gypsum powder solution to ensure you get your desired grinding results.
Please let us know:
·Your grinding material.
·The expected fineness(mesh or μm) and yield (t/h).
·The installation country and landform of installation area ( e.g. :highland).
(We will consider the local current and voltage based on the country and landform to ensure the stability of the equipment)
To find out more mineral information and solutions please contact or visit:
Tel: +86-773-3568321
Email: [email protected]