Introducing the RAD-Comet 2!
Intrepid Control Systems
Hardware and software tools for engineers in vehicle, Autonomy, connectivity, Automotive Ethernet & Embedded Engineering
Now with 2x 10BASE-T1S and 1000BASET1 Support
The RAD-Comet 2 is a versatile device for developing and testing 10BASE-T1S communication in automotive systems. It can be configured and used to simulate a node on a 10BASE-T1S network as well as capture and analyze 10BASE-T1S traffic simultaneously with other vehicle networks. All Ethernet and CAN traffic are timestamped precisely for logging or analysis in Vehicle Spy software.
When configured as a media converter, the RAD Comet can bridge between any of its 3 Ethernet physical layers. This is useful for connecting a PC to an Automotive Ethernet device for observing network activity in Wireshark or Vehicle Spy. It is also useful for integrating a 10BASE-T1S device or network into a 100/1000BASE-T1 network.
RAD-Comet 2 goes beyond by introducing dual 10BASE-T1S channels. Additionally, it incorporates low-level PLCA (Physical Layer Collision Avoidance) bus monitoring and captures all bus symbols allowing you to decode and search 10BASE-T1S symbols directly in Vehicle Spy.
Product Features:
-Time Synchronization
-OPEN Alliance TC10 Sleep and Wakeup (100/1000BASE-T1)
-MACsec Encryption Support (100/1000BASE-T1)
-Device Power Connections
-DB9 connector for reliable in-vehicle use
-Convenient barrel jack for bench use
-Status LEDs
-PC Connectivity
领英推荐
Watch Intrepid's COO, Colt Correa, as he walks us through a quick overview of our 10BASE-T1S products.
Low Cost Device for Interacting with 10BASE-T1S Networks
Intrepid’s RAD-Meteor is a cost effective means to add a 10BASE-T1S?(IEEE Std 802.3cg)?port to your computer using USB. In addition to monitoring 10BASE-T1S traffic as if it were a standard Ethernet port, the RAD-Meteor network adapter supports the test modes and wave forms required to test the 10BASE-T1S network. RAD-Meteor also has a built-in full color display to view network activity and monitor the 10BASE-T1S status registers.
Upcoming?10BASE-T1S Training Classes
This hands-on course will teach you how to master the 10BASE-T1S interface from scratch. You’ll learn how this next-generation network is designed to replace CAN/CAN FD and how it supports and enables new architecture. By the end of this workshop, you’ll be able to confidently work with 10BASE-T1S and 10SPE interfaces.
Click HERE to see our full catalog of training classes!
Come See Us at CES 2024!!
Catch the first look at our RAD-Comet 2 demo AND the unveiling of our NEW neoVI Connect, edge connect platform!!
We'll be displaying our demos January 9th - 12th at the?Las Vegas Convention Center West Hall?at booth #?3666.
You don't want to miss this! ?