INSULATED PLASTERBOARD - an ideal material for thermal modernization of buildings

ADPOL is a Polish manufacturer offering INSULATED PLASTERBOARD - a modern method of thermal modernization of buildings.

We produce three types of INSULATED PLASTERBOARD :

1. Plasterboard permanently connected to PIR board - thickness 62.5 mm - 12.5 mm plasterboard + 50 mm PIR - due to the very good thermal insulation of PIR boards, the use of a 50 mm PIR board gives the same warming effect as the use of 100 mm of EPS or MINERAL WOOL

2. Plasterboard permanently connected?to a polystyrene board - thickness 62.5 mm - 12.5 mm plasterboard + 50 mm EPS polystyrene

3. Plasterboard permanently connected?to a mineral wool board - thickness 62.5 mm - 12.5 mm plasterboard + 50 mm mineral wool

INSULATED PLASTERBOARD are perfect for THERMAL MODERNIZATION OF BUILDINGS - insulating walls, ceilings and roofs from the inside

Standard sizes of INSULATED PLASTERBOARD: width 1200 mm, length 2400 mm and thickness 62.5 mm

Very simple installation, no special equipment required, weight from 8 kg/m2 to 11 kg/m2 depending on the insulation used - that is, a standard panel weighs only from 23 kg to 32 kg!!

On request, we produce INSULATED PLASTERBOARD from 2000 to 3000 mm in length and from 32.5 mm to 162.5 mm in thickness

We produce only to order. Logistic minimum 1000 m2

?Detailed offers are presented on request - more in direct correspondence - [email protected]