Instructions for use and maintenance of pneumatic tools

Precautions for pipeline configuration:

1. The distance between air compression and the workplace should be shortened as much as possible, and whether the pipeline exhaust is smooth or not should be considered.

2. The main pipeline forms a network for maintenance and tracking of leaks.

3. The shorter the pipeline in the work area, the better, forming a ring-shaped piping to reduce pressure drop.

Air pressure: The best air pressure for pneumatic tools to work is 0.6Mpa (6kgf/c㎡) at the near side. If the pressure is too low, the tool's ability will be reduced. If the pressure is too high, it will easily lead to accidents or failures.

Air consumption and air compressor energy: In order for pneumatic tools to work, a certain amount of compressed air is necessary. Basically, an air consumption of 0.1m3/min must use a 0.75KW air compressor.

Precautions for safe use:

1. Before using the tool, please read the operating instructions in detail to ensure safe use.

2. Before use, check whether the tool is abnormal, whether the air pressure is normal, and the pipe winding situation.

3. When operating tools, repairing tools or replacing accessories, please wear impact-resistant and masks (face protection equipment) at all times. When not working, please turn off the air source first and unplug the joints between the tool and the air source.

4. Please keep a distance from the rotating shaft and accessories in rotation, do not wear jewelry and bulky clothes to use tools, and tie up long hair, scarves, ties and other easily entangled objects.

5. When operating, please wear labor protection devices and clothing. .

6. Please do not aim the air outlet at yourself or others.

Maintenance:

1. The air source supplying the tool must be processed to ensure cleanliness and dryness.

2. Please use an oiler to lubricate the tool and adjust the flow rate to 2 drops per minute. If the oiler is not used, 3-4 drops of lubricating oil must be injected from the pipe joint every day. Do not use oil with high viscosity, as it will cause abnormal tool transfer.

3. Do not throw or hit the tool.

If you want to know more welcome to visit our website at https://www.westyosen.com/

Or get in touch with us! Tel:+86 13180090898 Email:[email protected]