How to do Impact Resistance Test for LED Flashlight with 10 m height
What is Impact Resistance for LED Flashlight?
For LED flashlight,Impact Resistance is the degree to which a device resists damage from dropping on a solid surface.
How is Impact Resistance Process in ANSI FL 1 Standards?
Each LED flashlight sample is dropped 6 times using impact orientations that approximate a cube. Each sample must be released on each orientation of the approximated cube. Samples must be marked prior to the drop test in a manner that can assure that all 6 drop orientations are tested.
Dropped LED flashlight must not exhibit any cracks or breaks visible with normal vision.The product must remain fully functional. Some reassembly is allowed prov1ded that it is done without any tool or replacement components.
Cosmetic defects such as scuffs, scratches, rubs, or abrasions will not be considered reasons for failure.
All five test samples must pass the rated height.Ratings in excess of 1 m shall be reported with values rounded down to the nearest whole meter.
So higher impact resistance means more safe and durable for accidental drop.??To satisfy severe outdoor applications,we had produced 3 m impact resistance torch in 2018,and recently our engnineers have updated it to extreme 10 meters impact resistance degree(also with IP67 protection level),this feature is very rare in current markets and greatly believe it is able to be used in nearly all hard environment??
????More details
Tim Lee
ShineWa Lights
E-mail: t[email protected]