Hydranautics HYDRAcap MAX 80 Equivalent TFMAX105
Darren (Jim) Wang
@ N1B60, Hall N1 on Aquatech China from Dec. 11 to 13 for TaFlux UF Membrane Module, RO Membrane Element and MBR Membrane Module.
TFMAX105 is developed and manufactured as the equivalent, direct replacement, alternative, retrofit and analogue to Hydranautics HYDRAcap MAX 80 (MAX80) UF membrane module.
Hydranautics HYDRAcap MAX 80 equivalent ultrafiltration (UF) membrane module TFMAX105 is a pressurized module, which is designed and manufactured for the filtration of surface water, potable water, seawater and industrial wastewater. These UF modules are made of new generation PVDF hollow fiber membrane with high fouling resistance and hydrophilicity.
TFMAX105 UF modules are applied in flexible UF systems, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes such as NF and RO.
Features
Advantages
Applications
Module Dimensions
L (mm/in): 2340.6/92.15
D1 (mm/in): 250/9.84
Connection port: DN50 (2” Victaulic)
Air inlet: 3/8” FNPT
Specifications
Membrane material: PVDF (Polyvinylidene Fluoride)
Fiber ID/OD: 0.6/1.2 mm (0.024/0.047 inch)
Flow direction: Outside-in
Pore size: 0.08 μm
Housing material: UPVC
Potting material: Epoxy resin
Effective membrane area (m2/ft2): 105/1130
Operating and Cleaning Limits
Type of operation: Dead-end flow or cross flow
Typical flux (25°C): 34 - 120 L/m2·h (20 - 71 gfd)
领英推荐
Temperature: 1 - 40°C?(34 - 104°F)
Maximum feed pressure?(20°C): 5?bar?(73 psi)
Maximum feed pressure?(40°C): 3?bar?(44 psi)
Maximum trans-membrane?pressure: 2?bar?(30?psi)
Backwash flux (25°C): 75 - 120 L/m2·h (48 - 71 gfd)
Maximum backwash pressure: 2.5 bar?(36 psi)
Maximum air scour feed pressure: 2.5 bar?(36 psi)
Air scour flow: 12.3 - 15.4 Nm3/h (7.3 - 9.1 acfm)
Air scour duration: 2 - 4 minutes
Air scour frequency: Once every 20?- 60 minutes
pH-Continuous operation @25°C: 2?- 11
pH-Cleaning @25°C: 1 - 13
Maintenance cleaning?frequency: 1?- 3 times per day
Maintenance clean duration: 20?- 30 minutes
Disinfection chemicals: NaOCl, ClO2?or NH2Cl
Cleaning chemicals: NaOH, HCl, H2SO4?or citric acid
Instantaneous chlorine tolerance: 5,000 ppm
Maximum chlorine exposure: 750,000 ppm-hrs
Maximum?feed TSS: 100 ppm
Maximum feed turbidity: 300 NTU
Maximum feed particle size: 300?μm
For more details, please visit our website: https://www.tanalwater.com/e_products/taflux-tacap-max-series-16-9.html.
For Hydranautics HYDRAcap MAX 80 equivalent and more UF membrane modules, please send me an email to [email protected] or contact me on Mobile/WeChat/WhatsApp: +86-155 2707 6891.