Laser Distance Meter To Save Your 99% Time When Measure

Hi there,

Laser distance meter is a handheld tool to measure distance ,area, volume, Pythagorean, by semiconductor laser reflection. do you already have one?

Some supplier may group it as a hand tool, and some may group it as electronic tool. No matter in which group, it is widely accepted and applied for for various types of applications in industries, construction and house decoration, furniture industry even in give-away business.

It’s a very useful device which gives accurate measurement of distance, area and volume, especially in large areas such as rooms, apartments, buildings, real estates, factories, warehouses, infrastructures, gardens, roads, and many other applications requiring accurate results for distance, area and volume measurement.

General usage: Place a laser rangefinder at Point A, press the ON button to activate the laser, aim the laser dot to Point B, and press the On button again to measure the distance between the two points.

Let's take the left laser distance meter as an example to see more in detail:

Area measurement:

Press the left button shortly until Parallelogram symbol was shown on the screen. To press left button to finish the measurement on the first edge, then to press this button again to?finish the measurement on the second edge?and the device will perform the area calculation automatically, and the result will be shown on the main displaying area

Volume Measurement

Press?the left button shortly until?cube symbol?was shown on the screen. To Press?the left button to finish the measurement on the three edges respectively, then?the?device will perform the volume calculation automatically, the calculated result will be shown in the main displaying area.

Pythagorean Measurement

The Pythagorean measurement mainly used the Pythagorean theorem to calculate the object distance that cannot be measured directly.

To press the left?button shortly, until triangle symbol?was shown on the screen. According to the instruction on the screen, to press??button to?respectively complete the measurement from right-angle side to right-angle side and hypotenuse to right-angle side,?the Pythagorean calculation?will finished?automatically and the calculated result will be shown in the main displaying area.

Note:

The length of right-angle side should be shorter than the length of hypotenuse when using indirect measurement.

Target points should be in the same line and the laser beam should be right-angled to the line.

Above is the general usage of the laser distance meter, do you get it? Now, take your device and have a double try.