How to use the dynamometer in thunderstorm and wet days
Now it has entered the thunderstorm season, it starts to rain every few days, and the rainfall is still very heavy. The continuous rainfall not only makes people feel irritable, but also irritates the "tension meter". In the past, the rain in spring was the most. In the past two years, thunderstorms in spring, summer, autumn and winter have also increased. Autumn is coming. Everyone knows that the connecting day between summer and autumn is the season with the most thunderstorms, and the ground is very wet. However, the wet weather of thunderstorms must be fully prepared for the maintenance of the tension meter. Shanghai Gantan tension meter load link manufacturer summarizes many years Come to the production and sales, use the experience of the tension meter to share with you the preventive measures of the tension meter tension load cell to survive the "spring, summer, autumn and winter" in the thunderstorm and wet weather.
The customer reported to us that after the measurement was inaccurate, the measurement was accurate after verification. But after a period of time, such problems will occur again, and repeated verification and use.
In the gloomy rainy season and the rain continues, the degree of moisture on the ground is very different from the air, so it is very important for the maintenance and maintenance of the tension meter load link:
First of all, through understanding that the tension meter loadlink is used in a high temperature environment, the temperature can reach 40 degrees or more, so it is judged to be used in the environment. Generally speaking, those without high temperature resistance can only be used at normal temperature. Therefore, inaccurate measurement will occur under high temperature conditions.
Secondly, in continuous thunderstorm days, indoor mopping is slow to dry. Therefore, the fault may also be caused by inaccurate measurement after the ground is wet for a long time. Rainfall increases during the thunderstorm and wet season, and the ground will also be affected by rain. You can put some desiccant in the use room.
A few days later, the customer reported that it was caused by a humid environment. According to the method we provided, place the desiccant indoors and replace it in time, and it will work normally.
Precautions :
1:The connecting parts are maintained every six months; regularly check whether the shackle is loose;
2: No foreign objects such as stones should be stuck in the surrounding gap;
3: For the tension gauge installed in the field, the device should be checked regularly;