How to use the ceramic expoxy glue?

How to use the ceramic expoxy glue?

(1)Cleaning and polishing the area where need to use glue, including the greasy dirt, dust, rust ect. Washing the surface by Acetone or acetic ether and then dry properly.

(2) Mix A and B by standard ratio, by the weight standard. Mixture should be sired uniformly. Putting the mixed glue on the surface where need to be pasted, then connect those two part immediately and give pressure at the same time. After 8-10 hours, the strength can reach the structural strength, then the connected parts an be removable.

(3) The workable time is 40 minutes after mixing the glue at temperature 25℃.

(4) Do not mix too much glue each time, and the mixture should be used immediately. The gel time is related to the temperature as well, the higher temperature, the shorter of gel time.

(5) Avoid touch skin, eyes etc. In case touch onto skin, should clean by alcohol and soap, finally clean by water. In case touch into eyes, should clean by the water immediately and ask help from hospital.

#ceramicglue?#adhesive?#expoxyglue #tecera