How to use Axle Scale

Instructions:

1. Use after long-term storage, and use after charging;

2. Place the countertop on a stable place, place the rubber slope and connect the countertop with the instrument interface;

3. Open the on/off key of the instrument panel;

4. The instrument self-checks and automatically resets to zero, then it can be used normally;

Static use:

a) Automatically reset to zero when power on, if there is margin, please press the zero key

b) The vehicle enters normally and the front axle stops on the metering table;

c) Press the print key to print out the weight of the front axle;

d) The vehicle moves in normally, and the rear axle stops on the metering table;

e) Press the print key to print out the weight of the rear axle;

f) Press the accumulative key to print out the total weight;

g) Vehicle used;

Dynamic use

a) Automatically reset to zero when power on, if there is margin, please press the zero key

b) Press the  key, the lower left corner of the display shows the word HOLD;

c) Vehicles are limited to 10km/h;

d) The printer automatically prints the weight of the front and rear axles;

e) Press the accumulative key to print out the total weight;