How to use ANKAI Jump Starter?

ANKAI Jumper or portable battery booster can help you get your car up and running quickly in inclement weather or when the car's battery is running low. Before using the product, please read the user manual carefully and follow the instructions to avoid any danger or inconvenience.

Jump start steps:

Step 1: Connect the red clip to the positive (+) terminal of the vehicle battery and the black clip to the negative (-) terminal

Step 2: Insert the jumper cable into the jumper starter socket

Step 3: Start the vehicle

Step 4: Unplug the jumper from the vehicle battery

Important notice for Jump starting vehicles:

1.    Ensure that the remaining power of the jump starter is higher than 50%.

2.    When the vehicle battery is completely exhausted, disconnect the negative terminal of the vehicle battery and use the jumper starter to start the engine directly. If you are not familiar enough with the vehicle, it is not recommended to do this, you should consult a professional.

3.    Once the engine is started, remove the jumper clip from the vehicle battery within 30 seconds.

4.    Never reverse the jumper clip to the vehicle battery.

5.    Do not use a 24V output to start a 12V car or motor.

6.    If you need to start again, please wait at least 15 seconds

How do I charge my laptop?

1.       Choose the right adapter

2.       Connect the cable to the output port of the product

3.       Connect the cable to your laptop using the selected adapter

4.       Turn the main switch to ON, then press the power button to select the appropriate output voltage; once completed, it will start charging

Leading car instant jump starter manufacturer and supplier-ANKAI

How to use the torch?

1.       Turn the main switch to ON

2.       Press the power button for 3 seconds to turn on the torch function; press again to turn on the SOS mode; press again to turn on the flash mode; press again for 3 seconds to turn off

3.       Press the power button twice to turn on the warning light function (select models only); press again to turn it off

How do I charge my phone, iPad or other electronic device?

1.       Plug the USB cable into the 5V USB output port.

2.       Connect the USB cable to your phone/tablet/other electronic device.

3.       Turn the main switch to ON (if applicable), then press the power button to start charging.

4.       Once the device is fully charged, the jump starter will cut off the charge; if it needs to be recharged, press the power button again

How do I charge ANKAI Jump Starter?

1.       Connect the included power adapter / car charger / charging cable and jumper starter input port

2.       Connect the power adapter/car charger/charging cable to the power source; the power indicator will start to flick, which means it is charging

3.       After fully charged, the flick will stop.