How to Transform The Lithium Battery Industry Intelligently

?

In recent years, the concept of "carbon neutral" and "carbon peak" has become a new darling pursued by the market. Under the goal of "green technology, low-carbon ecology", it is promoting the improvement of the energy structure. Among them, lithium battery, as the leading role of environmental protection and energy saving, has ushered in the era of rapid development and intelligent transformation. Today, please follow the Meiji sensor to understand the introduction of lithium industry automation scheme.

01

Battery unit in place detection

Project requirements:

In the manufacturing process of battery unit, it is necessary to detect the position of the unit and carry out the operation of the subsequent process.

Solution:

ESB series background suppression photoelectric, using the position-type acceptance device detection principle, is not susceptible to target color and color difference, with stable detection performance. The ESB series photoelectric is installed above the discharge position of the finished battery to detect the arrival of the battery and avoid the background influence of the transmission belt line.

02

Test pole tape of winding machine

Project requirements:

In the winding machine for lithium battery equipment, different colors of tape (translucent or fully transparent) need to be detected, and the battery pole piece should be positioned and cut. The tape has a variety of colors, such as transparent, translucent, gold and green, which pose a certain challenge to photoelectric detection.

Solution:

ESC color standard photoelectric adopts RGB three-color light source, and realizes the detection of material color by feeding back the proportion of three primary colors. ESC color code photoelectric has millisecond response speed, can switch color and color code mode, save up to eight color and color code state, various color and contrast surface of the material for detection.

03

Entry protection for winding units

Project requirements:

The continuous winding movement of the material during electrode production can be hazardous and the operating area needs to be secured to ensure the safety of workers.

Solution:

SAF series safety light curtain safety level 4, TUV certification, safe and reliable performance. A safety light curtain is installed outside the winding machine to form a grating protection area, which can reliably detect the entrance of the winding unit. When an object passes through the grating protection area to cover the beam, the light curtain will immediately output a signal to stop the operation of the machine, so as to play a safety protection effect and protect the safety of the staff.

?